View Full Version : Notch code ID : If anyone recognizes this set of notches please let me know
Jan Normandale
10-Mar-2012, 13:56
I recently bought a set of 10 - 4/5 holders from a LFPF member. I opened one and found it loaded with film. I contacted him and he said he didn't recall the film in the holders. I've made a sketch as best I can. Can anyone identify this film. If I can I'll try and shoot and develop it. I've checked a couple of sites online for these notches and can't see them listed on the resources I've visited. Notably one prepared on Kodak BW by RIT . Any help's appreciated. Thanks!!
looking at the top right, with the emulsion facing you, the notches are a shown (the use of a capital "I" is my attempt to delineate the top right corner with a vertical line)
69916
MIke Sherck
10-Mar-2012, 14:34
Try this one: http://en.wikipedia.org/wiki/Notch_code or this one: http://photondetector.com/tools_ref/filmdata/
Yours could be Kodak Ektapan 4162, Fuji Velvia 100, from a quick survey. There are a number of different sources of film notch codes on the web.
Mike
Steven Tribe
10-Mar-2012, 14:57
Or Ektachrome E100VS.
Are your fingernails long enough to check the inside corners (square, diagonal or round?).
rjbuzzclick
10-Mar-2012, 15:08
Hi Jan,
I looked at some info sheets I have, and if it has rounded corners is could be Agfachrome RSX 50.
Reid
Jan Normandale
10-Mar-2012, 21:10
Hi Reid, the diagram is representative of the shape of the notches. There are two, one long the other almost a V shape. Both notches have the same "slanted" 45 degree sides not 90 degrees. I know because I placed paper over the notches and rubbed a pencil over the paper to get the notch pattern outline all inside a dark bag.
Mike I tried that one but I couldn't see the pattern there. I'll check again just in case.
Steven, the corners are diagonal / slanted at 45 degrees and not square or round.
thanks for the replies!
Jan Normandale
10-Mar-2012, 21:15
Mike I think that the film might be Kodak Ektachrome 100 VS... here's a Kodak link to their product PDF....
http://www.kodak.com/global/en/professional/support/techPubs/e163/e163.pdf?id=0.2.22.14.13.20.5.24&lc=en
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.