View Full Version : Where do I get lensboards?
Colin D
15-Feb-2012, 19:04
Hi
I'm looking for Linhoff Technika III lensboards for two lenses and shutters. They are:
Fujinon W 250mm f6.7 (Seiko shutter)
Schneider Super Symmar XL 110mm f5.6 Aspherical (Copal 1)
I've looked on e-bay but can't make any sense of what is being offered and most of them listed for Linhoff don't appear compatible with the Technika III.
Can anyone tell me where I find the right lensboards, and what
thanks
Take a look at the listings on KEH www.keh.com
They have a huge assortment of lens boards at decent prices.
Note that the mounting hole diameter for Copal shutters is a bit larger than the thread
diameter on the back of the shutter due to a ridge on the retaining ring. The same may
be true for the Seiko, but I don't know since I've never mounted one.
You'll need a lens wrench to mount/dis-mount a shutter.
The best ones I know of are the Rodenstock: http://www.bhphotovideo.com/c/product/131992-USA/Rodenstock_260600_Metal_Lens_Wrench.html
and the Toyo: http://www.bhphotovideo.com/c/product/61131-REG/Toyo_View_180_625_Lens_Mounting_Wrench.html
There are slight differences between the products. The Toyo supports Seiko shutters, but not the Copal #3.
If you buy a used lens, make sure it includes the retaining ring and both lens caps. These can be expensive if missing.
The lenses at KEH always include the ring, and have caps if the notation "with caps" appears in the description.
- Leigh
D. Bryant
16-Feb-2012, 06:34
Hi
I'm looking for Linhoff Technika III lensboards for two lenses and shutters. They are:
Fujinon W 250mm f6.7 (Seiko shutter)
Schneider Super Symmar XL 110mm f5.6 Aspherical (Copal 1)
I've looked on e-bay but can't make any sense of what is being offered and most of them listed for Linhoff don't appear compatible with the Technika III.
Can anyone tell me where I find the right lensboards, and what
thanks
Contact Jeff at Badger Graphics,
http://www.badgergraphic.com/
Joshua Dunn
16-Feb-2012, 14:05
Try Ted at Bromwell Marketing, he's a great guy and can make any size lensboard you need.
http://www.bromwellmarketing.com/
-Joshua
some guy has a stack of blank, generic tech III boards on ebay..you'd have to drill yourself though
they used to be easy to find..but have been getting harder, and more expensive
the newer, black tech IV and later boards will not fit a tech III camera..so make sure there are tech III
Hi
I'm looking for Linhoff Technika III lensboards for two lenses and shutters. They are:
Fujinon W 250mm f6.7 (Seiko shutter)
Schneider Super Symmar XL 110mm f5.6 Aspherical (Copal 1)
I've looked on e-bay but can't make any sense of what is being offered and most of them listed for Linhoff don't appear compatible with the Technika III.
Can anyone tell me where I find the right lensboards, and what
thanks
Colin D
17-Feb-2012, 03:37
Thanks everyone I'm following up your leads.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.