View Full Version : 72xl with cokin P?
Has anyone made any kind of adapter to be able to use the cokin p filters with the 72xl? Just handholding seems to work with the squares so I guess the grads should be ok but they are too hard to hand hold accuratelly..
Just use the adapter ring, not tue holder. Attach the filter with binder "bulldog" clips.
Lachlan 717
6-Jan-2012, 21:50
I doubt that they will, as they are only 85mm wide. The 72XL uses 95mm filters.
If you're not using the CF, the Cokin Z-Pro filters will cover (100mm). If you are using the CF, you'll need the X-Pro series filters (112mm front thread).
Also check the thread pitch for the adaptor rings. From memory, the front thread of the 72XL is a 1.0 pitch, while the CF is 1.5
Thank you for your suggestions. I like the ring idea. I dont want to move to xpro just cause of 72. The p filter does work. I guess if you had some movement it might start shoving up but then you could shift the filter as well I am guessing..
Lachlan 717
7-Jan-2012, 15:42
I still doubt that the 10mm difference in size will allow this to work.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.