PDA

View Full Version : Ernemann Klapp


Ash
10-Aug-2011, 11:10
Does anyone here own one?

Have you managed to pull it apart for repair?


This is my next project...
Ash
10-Aug-2011, 12:25
Oh, never mind. Got it to work!
TheDeardorffGuy
12-Aug-2011, 09:53
What kind of oil did you use?
Ash
12-Aug-2011, 13:04
Because it is simple gears I used some WD-40 to clear out the crap. I've been running it for a few days to make sure it doesn't sieze up, and it's been perfect since.
Eric Rose
12-Aug-2011, 19:30
wow, I thought it was some dreaded disease!
Ron (Netherlands)
20-Nov-2011, 15:11
Does anyone here own one?

Have you managed to pull it apart for repair?


This is my next project...

And did you succeed in repairing the Ernemann Klapp?
Can you show pictures of how you opened the shutter?

thank you
Ash
21-Nov-2011, 10:12
All it took was some cleaning and lubrication. I used some WD40 and lighter fuel to free the gummed up cogs. There are screws all along the back to remove it in one piece exposing the shutter
Ron (Netherlands)
7-Dec-2011, 13:33
All it took was some cleaning and lubrication. I used some WD40 and lighter fuel to free the gummed up cogs. There are screws all along the back to remove it in one piece exposing the shutter

Ok I will have a look at it. Mine is a 12 x 9 cm camera. What do you take as a camera back for making pictures?
Ash
7-Dec-2011, 13:57
Mine is 9x12cm as well. It came with a film pack adapter converted to allow the common metal plate holders to fit. I'm waiting until I can afford some plate-to-film adapters for those holders. There's a temptation to manufacture a 5x4 back to fit instead though.

Along each edge is a screw, then you must remove the albada finder from the top of the camera as well - a screw is hidden under there as well.

Once you have removed those screws the back comes off as a whole. You needn't touch any of the curtains or gears unless someone has broken it. Look to the side at all the gears and you might have a lot of corrosion like mine. Use a air-blower to try and shift as much dust/corrosion as possible before adding lubrication.


I received a 9x12 GG back from a member on this forum that I cut to slide into the adapter back so that I could compose images, but mostly it's a camera to set at infinity.
Ron (Netherlands)
7-Dec-2011, 14:33
Mine is 9x12cm as well. It came with a film pack adapter converted to allow the common metal plate holders to fit. I'm waiting until I can afford some plate-to-film adapters for those holders. There's a temptation to manufacture a 5x4 back to fit instead though.

Along each edge is a screw, then you must remove the albada finder from the top of the camera as well - a screw is hidden under there as well.

Once you have removed those screws the back comes off as a whole. You needn't touch any of the curtains or gears unless someone has broken it. Look to the side at all the gears and you might have a lot of corrosion like mine. Use a air-blower to try and shift as much dust/corrosion as possible before adding lubrication.


I received a 9x12 GG back from a member on this forum that I cut to slide into the adapter back so that I could compose images, but mostly it's a camera to set at infinity.

Thanks so far for the info. I will first try to get the shutter up and running and see if I need to replace shuttercurtains (I have done that with other albeit smaller camera's, so that won't be a problem). Btw mine has an Ernotar lens f 4,5 150mm, I was told the camera was built in 1920 according to its serial nr. Oh, and I will have to clean up the lens as well, there is quite some dust inside. Can you post a picture of your camera with that GG back?
Ron (Netherlands)
10-Dec-2011, 15:07
Well here is a pictures of mine. If there are other members who have some experience taking pictures with these types of cameras, please let us know. The camera has a 9 x 12 cm back. So would like to know what possibilities there are to take pictures with this oldie: perhaps a converter so that it can take 4 x 5"?

http://farm8.staticflickr.com/7033/6488716761_3a6d63c7fe_z.jpg
Ash
10-Dec-2011, 17:05
Either yours has been stripped, or you are lucky enough to own a 'tropical' version.

Mine is black leather and very rough in comparison. Sorry I've not provided any photos yet. I hope to asap.
Brian Ellis
10-Dec-2011, 17:51
Is Ernemann Klapp a lens or a social disease?
Ron (Netherlands)
10-Dec-2011, 18:07
Is Ernemann Klapp a lens or a social disease?

I guess the latter, since it is mentioned in the papers:

http://farm7.staticflickr.com/6199/6065323746_93a789e182_z.jpg
Ron (Netherlands)
11-Dec-2011, 06:02
Either yours has been stripped, or you are lucky enough to own a 'tropical' version.

Herewith you can 'examine' the camera somewhat better:

http://farm8.staticflickr.com/7155/6488716731_1e19353052_z.jpg
Ash
11-Dec-2011, 08:46
Yes, definitely, just seen your other pictures on flickr as well
Tony Lakin
11-Dec-2011, 09:11
http://www.youtube.com/watch?v=bgnCB7oni8o

:D
Steven Tribe
12-Dec-2011, 15:34
Definitely a "Tropical Klapp".
Selected teak and the light tan bellows
catalinajack
13-Jan-2012, 07:29
I have a set of Ernemann 190mm lens cells. Does anyone have a use for them? The are in nice condition. The outer cell has an adapter ring to mount to a Copal #1.
Jonathan Barlow
13-Jan-2012, 13:43
Definitely a "Tropical Klapp".
Selected teak and the light tan bellows


Isn't that the tougher island strain that doesn't respond to antibiotics?