p-trick
25-Jul-2011, 13:24
I've noticed a slight light-leak in my Tech III somewhere close to the lens-board (I can see this by looking into the bellows from the back while the shutter is closed.
Right now, the problem could be due to two issues:
(1) a tiny light-leak between the lens and the lens-board (close to the retainer-ring); or
(2) a light-leak between the lens-board and the front of the camera (most likely at the light-seals around the circular hole in the front of the camera).
While I believe the second option is most likely, I'd like to hear about the best practice to narrow down the options.
More importantly, I'm interested in knowing how this can be fixed.
Any suggestions?
Right now, the problem could be due to two issues:
(1) a tiny light-leak between the lens and the lens-board (close to the retainer-ring); or
(2) a light-leak between the lens-board and the front of the camera (most likely at the light-seals around the circular hole in the front of the camera).
While I believe the second option is most likely, I'd like to hear about the best practice to narrow down the options.
More importantly, I'm interested in knowing how this can be fixed.
Any suggestions?