View Full Version : Schneider Kreuznach 135mm Xenar f4.7
hackphotographer
20-Jun-2011, 14:13
Does anyone know what the front filter thread size is on this lens?
Also, would you know if lens will fit a Tachihara F series?
Thanks in advance, Ken
http://www.bidnashville.com/maylarge135mm1.jpg
Read this (http://www.schneideroptics.com/info/vintage_lens_data/large_format_lenses/xenar/data/4,7-135mm.html). Filter size is M 40.5 X 0.5
Since the pitch isn't a standard 0.75 camera pitch you are probably out of luck but those with more machining knowledge than I might correct me on that.
Robert Ley
20-Jun-2011, 19:55
I have a Schneider Symmar 135 f:5.6 and it uses the same size filter. They are readily available from B&H and are 40.5x0.5 and fit perfectly. I have several and it is the only size that I carry aside from my 67mm filters that I have standardized for most of my lenses.
Philippe Grunchec
21-Jun-2011, 02:27
Heliopan!
drew.saunders
21-Jun-2011, 09:35
Also, would you know if lens will fit a Tachihara F series?
Thanks in advance, Ken
Since nobody else got this one, the lensboard pictured is a Sinar, which won't fit a Tachihara. Tachihara's use the Linhof Technika-sized board, but centered (which is less common than off-centered).
These will fit your Tachi: https://www.badgergraphic.com/store/cart.php?m=product_detail&p=1080
You'll have to remove the lens from the Sinar board and re-attach it to the Tachi board, for which you may want a lens wrench too.
hackphotographer
22-Jun-2011, 12:50
Hey I just wanted to "thank you" you guys for the help and insights regarding my question. You've been very helpful which makes this forum such a great place.
blessings,
Ken
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.