View Full Version : Calumet Lens Board
gardnermounce11
11-Apr-2011, 09:18
I bought a lens board on ebay only to find out it's much to big for my Calumet 4x5. The seller specified that the board is made for a Calumet 4x5, it says "Calumet" across the top, but the lens board covers the entire front of the camera, much more than the lens board opening.
What specifications do I need to look for in buying the correct lens board? What are the measurements? Did I buy a lens board for an 8x10?
Gem Singer
11-Apr-2011, 09:27
Calumet lens boards for 4x5 are usually 4"x4".
Calumet/Cambo lens boards are camera specific.
See: www.keh.com
(Click on large format, click on lens boards, then click on "show all".)
gardnermounce11
11-Apr-2011, 09:38
Your lens board is for an 8x10 camera.
Calumet lens boards for 4x5 are 4"x4".
See: www.keh.com
(Click on large format, click on lens boards, then click on "show all".)
Gotcha. Okay, starting to make sense. My lens is a copal no. 1; does this translate to a 33, 34, 39, 41, or 54 hole?
BrianShaw
11-Apr-2011, 09:43
Cambo/Calumet boards came in two (2) or three (3) sizes, depending on the camera not the film format. Many 4x5 Cambo/Calumet cameras used the 6x6 board.
BrianShaw
11-Apr-2011, 09:45
My lens is a copal no. 1; does this translate to a 33, 34, 39, 41, or 54 hole?
http://www.skgrimes.com/lensmount/shutmt/index.htm
You need the 41mm hole.
Gem Singer
11-Apr-2011, 10:48
KEH uses "ball park measurements" for their lens board openings.
An opening for a Copal 1 shutter might be be listed as 41mm or 42mm on their website.
Either size will fit. The retaining ring that is used to mount the lens allows for a small amount of play.
Howard Tanger
11-Apr-2011, 16:46
I bought a lens board on ebay only to find out it's much to big for my Calumet 4x5. The seller specified that the board is made for a Calumet 4x5, it says "Calumet" across the top, but the lens board covers the entire front of the camera, much more than the lens board opening.
What specifications do I need to look for in buying the correct lens board? What are the measurements? Did I buy a lens board for an 8x10?
First of all you need to know which model of Calumet 4x5 you have. Is it one of the early CC-400 models or a later Calumet rebranded Cambo camera? The CC-400 models take a 4x4" flat lensboard ( CC-420 ). Howard Tanger
Mark Sampson
11-Apr-2011, 16:59
Actually, the old-style Calumets (CC-400,-401,-402) take a 4" square board.
The newer Cambo/Calumets (NX, Cadet, etc.) take a larger board that they share with Cambos.
The Calumet C-1 8x10 takes yet a different, large, square board.
Simple, it ain't.
BrianShaw
11-Apr-2011, 20:16
The SK Grimes lensboard database should be consulted to ascertain the four different Cambo-Calumet lens boards.
Paul Bujak
13-Apr-2011, 14:22
The Calumet C-1 takes 6x6 inch boards with rounded corners, same as the Deardorff board. Square-corner boards will not fit.
Paul
Gem Singer
13-Apr-2011, 14:51
Paul,
The OP is asking about lens boards for his 4x5 camera.
The Calumet C-1 is an 8x10 camera.
Howard Tanger
13-Apr-2011, 15:49
The Calumet C-1 takes 6x6 inch boards with rounded corners, same as the Deardorff board. Square-corner boards will not fit.
Paul
The OP is not asking about boards for the 8x10 C-1 he needs lensboards for his "4X5 CALUMET" Howard Tanger
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.