PDA

View Full Version : Azo&ferrotyping



doc
4-Oct-1999, 17:00
I've been trying to ferrotype Azo without success. I've had trouble with micro-f ine bubbles, sticking to glass, concentric rings from print drying from outside to center, and you name it. Rust from stainless surface. Is there someone who ca n explain a method of successful ferrotyping to me. Thank you, David

Robert A. Zeichner
4-Oct-1999, 19:33
I used to do this many years ago. I used a ferrotyping plate (chrome plated steel, I believe). I remember using ferrotype polish to prepare the plate and recall my results were somewhat less than 100% perfect. I also recall using photoflo as a wetting agent to minimize bubbles and imperfections. That seemed to help. I've never had any success using a drum type dryer. I'm as curious now as you to hear what others have come up with.

Tony Brent
6-Oct-1999, 01:08
Use chromed metal tins. Polish them with Bon Ami cleanser. Treat the prints in Pakosol or make your own from photo-flo and glycerin. Lay them on the tin rather wet and roll or squeegee into good contact. I use a Premier heated dryer with good results.