View Full Version : Calculating bellows extension/focal length at different focal distances?
BetterSense
24-Sep-2010, 19:26
Say I have a box camera focused at 12 feet. How much closer to the film plane would I have to move the lens to focus it at infinity? I don't know how to calculate bellows extension for different focal distances, or where to find the formulas to do so.
SteveKarr
24-Sep-2010, 20:08
I can't figure out the site this came from so eMail me & I'll send you a handy measuring kit that takes all the thinking and math out.
Steve @ SteveKarr Shoots.com remove the spaces
SteveKarr
24-Sep-2010, 20:09
Premature like always !!
http://www.salzgeber.at/disc
Peter K
25-Sep-2010, 01:11
Say I have a box camera focused at 12 feet. How much closer to the film plane would I have to move the lens to focus it at infinity? I don't know how to calculate bellows extension for different focal distances, or where to find the formulas to do so.
If you don't know the focal-length of the lens it can calculated as follows
focal lenght = image distance / (magnification + 1)
then you can calculate
lens-to-film distance = (magnification + 1 ) * focal lenght.
More also at the LF home page here (http://www.largeformatphotography.info/bellows-factor.html).
Have fun
Peter
BetterSense
25-Sep-2010, 07:32
It's too hard to calculate the magnification. On wikipedia I found
1/S_1 + 1/S_2 = 1/f
My brain sorta-remembers this formula from college physics. S_1 and S_2 are the distances from the rear nodal point to the film and the from the front nodal point to the subject, and I'm not sure what that means. If I do the calculation to find S_1 with f=90 and S_2 = 12 feet then I get 92.3mm. I take this to mean I would need to move the lens 2.3 mm closer to the film to get infinity, but I don't know about the nodal point thing.
Peter K
25-Sep-2010, 08:40
My brain sorta-remembers this formula from college physics. S_1 and S_2 are the distances from the rear nodal point to the film and the from the front nodal point to the subject, and I'm not sure what that means. If I do the calculation to find S_1 with f=90 and S_2 = 12 feet then I get 92.3mm. I take this to mean I would need to move the lens 2.3 mm closer to the film to get infinity, but I don't know about the nodal point thing.
How to find the nodal points is described here (http://www.largeformatphotography.info/forum/showthread.php?t=60087&page=3). But keep in mind the nominal focal lenght, e. g. 90mm isn't always the effective focal lenght. With the Super-Angulon 90mm f/8 it's 90.7mm +/- 1 %. This datas one can find normaly at the lensmaker's website.
For LF practice it's easier to calculate with the distance between the front of the lensboard and the film surface focussed at infinity. For the SA 90mm it's 99.4 mm. Now you can calculate sufficient all you need as a photographer. Like
magnification = focal length / (subject distance - focal lenght)
or
close-up exposure time = (magnification + 1)^2 * time of distant exposure
and many more
Peter
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.