John Schneider
24-Jun-2010, 11:20
I picked up another lens for my Cambo Wide, but unfortunately the crash bars are a bit loose. By sliding the shifting panel I can barely see four screw heads on the inside, which presumably are for attaching the bars.
However I don't have enough access to tighten the screws without removing the shifting panel entirely. Does someone know how to do so? There is a tiny setscrew on the housing for the knob shaft, loosening which may allow the panel to slide freely. Otherwise the inserts that say "Cambo Wide" are glued on, and maybe these hide the fasteners which limit the motion of the shifting panel. But I'd like to hear if anyone has disassembled their panel before hacking into mine.
However I don't have enough access to tighten the screws without removing the shifting panel entirely. Does someone know how to do so? There is a tiny setscrew on the housing for the knob shaft, loosening which may allow the panel to slide freely. Otherwise the inserts that say "Cambo Wide" are glued on, and maybe these hide the fasteners which limit the motion of the shifting panel. But I'd like to hear if anyone has disassembled their panel before hacking into mine.