PDA

View Full Version : Recessed Lensboard



cp
20-Feb-2002, 03:34
hi, as far as i know , the recessed lensboard helps to buy extra bellow length f or movementsesp. in wideangles. But besides the higher cost, will it cause any harm if i used it instead of nor mal lensboard ,says in "normal lens--90-120mm" in a rail view camera , e.g. jeop ardise the front standard movement ? thanks

Scott Walton
20-Feb-2002, 09:15
Your right, about the lens board with a wide angle... it won't do any "damage" and your 90mm-120mm is still a wide angle area... If you were to say use it with a 210, you would be using more bellows draw than you need and giving yourself more headaches if you don't factor bellows factor. Cheers

Todd Caudle
20-Feb-2002, 12:40
Don't forget that it does move the axis point of the lens to a point behind the axis point of the front standard, meaning any on-axis titls will not be on-axis. The difference should be pretty negligible, though.

Jeff Scott
20-Feb-2002, 22:29
Actually, the fact that a lens is on a recessed board does not change the bellows extension since the extension is related to the lenses focal legnth and not bellows draw. If I have a 210mm lens on a 1" recessed board the bellows draw ( that is lens to film distance ) is stil nominally 210mm, not 210mm + 1". So no bellows extension factor need be applied. I have also noted that most front axis tilt points on cameras are actually behind the center of the lens so using a recessed board may actually improve the tilt action.