View Full Version : Sinar P & P2 - differences?
Roy Hammans
8-May-2009, 09:36
I have an opportunity to purchase a Sinar P2 8x10 back and bellows, but I have a 5x4 Sinar P.
Are Sinar parts interchangeable between the two ?
Thanks in advance for any replies.
BennehBoy
8-May-2009, 10:18
It should work just fine. I assume it is the metering 8x10 back as opposed to the bail arm one (that's the P2/P differential) Either way the rear frame will mount on the P bearer and the front of the bellows will couple to your front frame.
Peter De Smidt
8-May-2009, 15:12
As Ben said, there should be no problem.
Frank Petronio
8-May-2009, 15:26
The 8x10 bellows are different between the metering back and non-metering backs on the 8x10 size bellows, so you don't want to buy the wrong bellows should you need another or a bag or something.
All the 4x5 bellows work between every model.
Roy Hammans
9-May-2009, 00:26
Thanks to all for the helpful responses - much appreciated.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.