View Full Version : What's wrong with my 110mm XL lens?

14-Apr-2001, 09:12
Recently I got my Schneider 110mm XL and 210mm lenses. I found that the aperture ring of 110mm XL is much looser than the 210mm lens, the aperture ring on 210mm lens gives me really good feeling. I wonder if it might cause exposure problem, (I haven't used it yet). Thanks.

adam friedberg
14-Apr-2001, 11:51
my 110 is the same way and i haven't had any problems. i've never seen this on another copal shutter before. strange. unless yours is so loose it moves without touching it i wouldn't worry, just be aware when you are setting the lens.

Paul Schilliger
14-Apr-2001, 13:28
You could also carefully untighten the retaining ring behind the lensboard and i nsert a small piece of blotting paper as a brake behind the shutter. Be aware, if you do so, that the glass of the bac k element protrudes the screw when it is unmounted.

David Kaufman
15-Apr-2001, 00:36
I just got a 110XL as well and found the same "problem." But so far, in my early shooting tests, it does not seem to have any effect on the photos. The lens seems to be wonderful!

Kevin Crisp
15-Apr-2001, 02:24
On my Schneiders some are relatively tight, some are relatively loose, and some are in between. Will it effect your pictures? No, not at all, so long as the iris opens and closes when you move the lever, which I am sure it does. Once you set it (even on the looses ones) it won't slip.

andrea milano
15-Apr-2001, 06:40
a little spacer behind the aperture helps(schneider has very thin metal spacerson some lenses), you isert it netween front element and lens board, it doesn't affect the internal dstance of the lens, so don't worry too much other than that it only improves the "feel good" factor, don't exagerate with the spacer otherwise you cannot turn the aperture anymore

Cedric P. Thevenaz
16-Apr-2001, 19:32
I'm currently making the jump into 4x5 and this was my first choice for first lens. But boy, loose aperature rings, filter size problem issues (according to multiple posts on this site), and I'm thinking what's up with this lens. Are there other issues as well? I know this is a question rather than an answer - sorry. Hope you resolve it.

Kevin Crisp
16-Apr-2001, 21:41
Cedric: This is a great lens, as many of the archived comments attest. (Though I wouldn't make it my first lens when starting out in 4X5...) The aperture scale adjustments vary in stiffness from lens to lens, that's life. One photog's "loose" equals another's just right. Tastes great, less filling, tastes great, yawn. Put a step up ring on that 67 mm front and put a 72 mm filter on it. Problem solved. The fact that Schneider might have made the outer ring a tiny bit taller to avoid problems with SOME filters is a valid point, but this is still a great, sharp lens with a ton of coverage.