Fuji Finescan 2750

[RussPhoto]

Hello everyone!
I am in dilemma: to buy a used Fuji Finescan 2750 or new Microtek ArtixScan M1 to scan my 4x5 transparencies. Any suggestions and recommendation will be appreciated. Thanks

[Ted Harris]

If the 2750 is in good working order and has all the accessories and software then it should definitely outperform the M1, it is an entirely different class of . However remember that you are dealing with a machine that sold new in the $10K range and parts and repairs will be proportionate to that original price. Finally it will depend on where you are located. Service for Fuji scanners is sparse in North America but excellent in the UK.

[Gordon Moat]

Agreed on the Fuji FineScan line being very good scanners. Just be aware that only Fuji software runs on these, so you absolutely must have that to use the scanner.

http://www.fujifilmusa.com/JSP/fuji/epartners/ServiceSupportSelectProduct.jsp?prodcat=233842

That link will lead you to Fuji scanner support in the US. Fujifilm Electronic Imaging used to be headquartered in the UK, and service was better their previously, though should be little to no trouble currently in the US. However, as Ted indicates, repairs can be expensive.

Ciao!

Gordon Moat Photography (http://www.gordonmoat.com)

[Ted Harris]

Gordon,

I was excited to see that there might be US support but when I follow your link I end with digital camera repair facilities. Do you know which of these also handle scanners?

[Gordon Moat]

Fujifilm and there website are definitely tough to navigate. They do have a separate Depot Repair in New Jersey that can handle parts or service for older Fuji scanners.

http://www.fujifilmusa.com/JSP/fuji/epartners/ServiceSupportRepairContent.jsp?dbid=674543&prodcat=233842

You can try extension 3041 instead, though I might be off on that. I have gone through their Cypress, California office, but without a service contract it would be difficult to get an older used machine serviced. Be prepared for some confused sounding Fuji people on the phone, because it seems they rarely get calls about these scanners. That can either mean they rarely break, or that they rarely have been sold.

The downside of all this is that these are heavy. Other than replacing lamps, any other service would mean shipping a nearly 150 pound machine to New Jersey.

True native resolution of 2743 with D-range 0.0 to 3.7, still quite good compared to more modern gear. If you found a FineScan 2750 near the price of a Screen or Creo, then I would suggest getting one of the other scanners. If you found a FineScan near the price of a used Heidelberg Topaz, then the Fuji might be a slightly better deal, if and only if the software is there, and all original equipment that it came with is still intact.

I have seen the newer Fuji Lanovia at a printing industry trade show, and it is quite a nice scanner. The price is definitely high. Don't know if I would choose one over a Creo or Screen, even if I had that sort of budget. Remember, these were never really intended for enthusiasts, and really are a step somewhat beyond the average working photographer.

Ciao!

Gordon Moat Photography (http://www.gordonmoat.com)

[RussPhoto]

Thanks a lot Ted and Gordon for your reply and information. Finally I decided to get Finescan and will be picking it up in about two weeks.

[Joerg Krusche]

Hi,

if you think of buying a used Fuji Scanner .. take a look at the Fuji Lanovia as well, a superb machine ... and extremely well built.

Joerg

[Visualsoup]

How did the Finescan work our for you? I have been watching several on EBay with what seems to be pretty good prices compared to the new price. I am having a hard time finding out of the Finescan has full transparency capabilities so I can scan in my old dry plate glass negatives. My glass negatives range from 2 x 3 to 8 x 10.

Does anyone have input or a suggestion for helping me with an appropriate scanner with full transparency? Regardless, I need a large scanner for several large antique (1875-1888) county map books. Even with 11 x 17 I will have to scan in sections and use Adobe Photoshop to put them back together.

It's frustrating trying to find a large format scanner for my large documents and antique photos that will also have a large transparency for my antique glass negatives.

Any info is greatly appreciated!!! Thanks all...

[RussPhoto]

If you are planning to buy used FineScan 2750 make sure it comes with software and dongle (it won’t work without dongle) The scanner is pretty bulky and a little bit noisy. Weight –114lbs, dimensions - 37.4 x 26 x 13.4, scanning area 18.5x13.8 it has XY technology and could locate the image on any part of the scanning bed like any other high-end flatbed scanner. The scanner comes with Fuji ColorKit software. One part of the software (Colorkit Manager) drives the scanner, another one (Colorkit Editor) allows you to edit scanned images and assign various ICC input and output profiles. Overall I’m happy with the result I’m getting from my negatives and transparencies.

[KnightHawk]

Gordon, greetings!

Are you still employing your 2750 for your 4 X 5 or larger work flow?

I'm just about to make the install of a clean working unit. I'll be preferring the TWAIN firewire approach on a PC with Win XP...but I am open to trying the older ColorKit applications kit as well. I like the integrated and somewhat automated workflow approach (in theory) of the Colorkit...but I am not sure yet how it will look on-sceen as far as QUALITY visual orientaion when viewing for finer aesthetics.

Otherwise it'll be PhotoShop CS2 for now.

:)

[Don Dudenbostel]

I have a Lanovia Quattro an use colourkit software on a PC with XP. To my knowledge the twain driver will not work. It also works with mac OS 9 and 10.6. In each case the propped dongle is required. Parts be service are extremely scarce. I purchased this Lanovia Quatteo Fuji to replace my Finescan 5000 that I used for 6 years. The 5000 developed a logic problem and I purchased a salvaged 2750 for parts but the logic board was missing. I was lucky to find the Quatteo which is almost new a d works great. Feel free to PM if I can help. I have the PDF of thecservice manual and have worked quite a bit on Finescans.

[Brent Long]

I have a Lanovia Quattro an use colourkit software on a PC with XP. To my knowledge the twain driver will not work. It also works with mac OS 9 and 10.6. In each case the propped dongle is required. Parts be service are extremely scarce. I purchased this Lanovia Quatteo Fuji to replace my Finescan 5000 that I used for 6 years. The 5000 developed a logic problem and I purchased a salvaged 2750 for parts but the logic board was missing. I was lucky to find the Quatteo which is almost new a d works great. Feel free to PM if I can help. I have the PDF of thecservice manual and have worked quite a bit on Finescans.

Hi! I'm sorta new here (been away for a long time . . .). I have come across a Lanovia here in Japan, but cannot tell if the dongle is included from the pictures. I don't know how to describe it to the seller who is just trying to liquidate the thing for some company. It has software included.

I was under the impression that there was no way to run one of these (c550) without an older Mac, and that it also had to be the one paired to it when originally sold. Now, with your comment, I'm not so sure. Can you give me some advice on what to ask pertaining to the dongle, and whether or not I could run this on a second-hand machine and not the original?

[RaceRev]

Gordon, greetings!

Are you still employing your 2750 for your 4 X 5 or larger work flow?

I'm just about to make the install of a clean working unit. I'll be preferring the TWAIN firewire approach on a PC with Win XP...but I am open to trying the older ColorKit applications kit as well. I like the integrated and somewhat automated workflow approach (in theory) of the Colorkit...but I am not sure yet how it will look on-sceen as far as QUALITY visual orientaion when viewing for finer aesthetics.

Otherwise it'll be PhotoShop CS2 for now.

:)


Does any one have an update on this thread? I need a 13+ X 13+ flat bed scanner and cannot locate one or anything I can afford.

[Miguel Coquis]

Got two Fuji finescan 2750 complete scanner units, one is running ok and the second one needs adjustments.
Where are you situated ?

[RussPhoto]

If you're in Toronto, Ontario I can scan it for you.

[deeblade]

I have a Lanovia Quattro an use colourkit software on a PC with XP. To my knowledge the twain driver will not work. It also works with mac OS 9 and 10.6. In each case the propped dongle is required. Parts be service are extremely scarce. I purchased this Lanovia Quatteo Fuji to replace my Finescan 5000 that I used for 6 years. The 5000 developed a logic problem and I purchased a salvaged 2750 for parts but the logic board was missing. I was lucky to find the Quatteo which is almost new a d works great. Feel free to PM if I can help. I have the PDF of thecservice manual and have worked quite a bit on Finescans.

Hi there, can you still help me with a fuji finescan 2750? i'm in trouble with!! please answer. i live in italy, here there's nobody can help me. Thanks

[deeblade]

The problem is that acquire a black striped frame in both mode (reflection, trasparency) I did run the test, with the maintenance utility. The result is an error about focus and about digiteser volt. I hope to find a solution. Thanks everybody