Gregory Kriss
11-Nov-2000, 23:53
I use an older Sinar Norma 4x5 and 8x10. After a friend let me use his newer Sin ar with its built-in depth of field calculator on the dial of the rear standard, I became hooked on this feature. To this end, I measured the f/scale on his cam era's dial for 4x5 and 8x10 formats and created a scale based on these measuemen ts for my rear 4x5 and 8x10 standards. But in moving I misplaced the scales.
Could someone out there who has a newer Sinar 4x5 and /or an 8x10 with the depth of field scale/dial email me the following measurements in mm's.
Distance from the zero point on the dial that the standard moves to the f/4 mark , f/5.6 mark, etc. through the f/64 mark on the dial for the 4x5 format.
Also if someone has an 8x10 could they email me the distances for the 8x10 forma t?
From these measurements I can easily make the depth of field scales for my 30+ y ear old Sinar's rear 4x5 and 8x10 standards.
Many thanks in advance.......
Greg
Could someone out there who has a newer Sinar 4x5 and /or an 8x10 with the depth of field scale/dial email me the following measurements in mm's.
Distance from the zero point on the dial that the standard moves to the f/4 mark , f/5.6 mark, etc. through the f/64 mark on the dial for the 4x5 format.
Also if someone has an 8x10 could they email me the distances for the 8x10 forma t?
From these measurements I can easily make the depth of field scales for my 30+ y ear old Sinar's rear 4x5 and 8x10 standards.
Many thanks in advance.......
Greg