Carsten Wolff
15-Oct-2007, 15:57
I'm wondering if anyone would know whether I could fix/modify my old Arca B (=base tilt) kit like this:
I've put 2 old Arca Bs (a 5x7 with the leather w/a/ bellows and a 4x5 with a standard one) together into a more modular "2 to 3 standard" Arca and have been pleased with the result. However, the 171mm 4x5 standard frames are all cracked (plastic, vs. the metal 5x7 frame) and I thought I might be able to replace them with F or M-line frames. (Although I had glued them, after which they were fine for a long time, recent abuse (read: smash) damaged the bellows locking mechanism).
Would anyone know whether that would work, i.e. would the bellows and the tilt mechanisms (or could they be made to) match these frames? The swing/tilt base I'm quite sure would fit; the bellows however I'm less sure about. I've read somewhere that pre-1984 bellows will not fit modern frames (but can they be slightly modified, so that they would?)
The lens board panel is less of an issue as I've got all of my lenses on Linhof boards anyway.
I live in a small town in regional Australia, so popping into the nearest Arca dealer to mix-and-match is not the easy option....:(.
Any help appreciated.
I've put 2 old Arca Bs (a 5x7 with the leather w/a/ bellows and a 4x5 with a standard one) together into a more modular "2 to 3 standard" Arca and have been pleased with the result. However, the 171mm 4x5 standard frames are all cracked (plastic, vs. the metal 5x7 frame) and I thought I might be able to replace them with F or M-line frames. (Although I had glued them, after which they were fine for a long time, recent abuse (read: smash) damaged the bellows locking mechanism).
Would anyone know whether that would work, i.e. would the bellows and the tilt mechanisms (or could they be made to) match these frames? The swing/tilt base I'm quite sure would fit; the bellows however I'm less sure about. I've read somewhere that pre-1984 bellows will not fit modern frames (but can they be slightly modified, so that they would?)
The lens board panel is less of an issue as I've got all of my lenses on Linhof boards anyway.
I live in a small town in regional Australia, so popping into the nearest Arca dealer to mix-and-match is not the easy option....:(.
Any help appreciated.