PDA

View Full Version : 1 year old Tmax 100 film



Pat Kearns
23-Oct-2000, 14:45
Looking through some film stock I have in my fridge not freezer, I found a box o f Tmax 100 with an expiration date of 11/1998. It is unopened and has been stor ed at 45 degrees. I hate to trash a 100 sheet box of film. What kind of image loss can I expect if any? Thanks.

E.L.
23-Oct-2000, 15:53
None. The film would be fine even if already loaded and stored at room temp. B&W is much less sensitive than color over long periods of time.

David A. Goldfarb
23-Oct-2000, 17:12
I've been using, occasionally, some TMX in 35mm I found, rolled from bulk, circa 1993 (exp. must have been around 1995), frozen part of that time, part of the time--who knows? Contrast is a bit less than fresh film, but otherwise I get normal results.

Dave Anton
23-Oct-2000, 20:07
Pat, Last year I've used TMAX 100 and TriX that expired in 1988! It wasn't critical zone work but it still produced some great pictures. I think expired film is great in that it feels "expendable" maybe even "disposable" and as a result this carefree attitude can produce some creative images. I love expired film, especially when it's given to me for free! Dave.

pat krentz
24-Oct-2000, 02:30
I have some Pantomic-X Aero that expired before 1975 and was cold stored for all that time. It is some of the best film I have ever used, even though it is slow, (ASA 40) it is 5" by 2500 feet. Great film. Pat

William Leviit
24-Oct-2000, 03:08
I've used Tri X dated 1983 stored in a basement. The film base is somewhat fogged but is still useable. I have some T-Max 120 film, dated 1997, stored in the fridge and it too have some base fog. But the out-dated film is still good, especially for high contrat landscapes. Because of the reduced contrast, the tonal range remains very printable.

Pete Andrews
24-Oct-2000, 05:39
You might notice a slight increase in grain size compared to 'in-date' film, but with Tmax100's fineness of grain, it'll hardly be the end of the world.

Scott Walton
24-Oct-2000, 09:51
A bit benzotriazole in the developer wouldn't hurt but the film should be ok.