John Kasaian
31-Aug-2007, 13:18
My $9 Seal 150 Jumbo dry mount press platen cleaned up very nicely. All thats left is some stains on the platen so I'm thinking of polishing it up and maybe reducing the discoloration (without getting too obsessive about it) so which polish to use? Brasso? Dupont #7 Polish? Dupont Rubbing compound? Blue Coral? Bon Ami? I want to avoid using anything thats abrasive enough to cut into the aluminium platen.
I also need to re-felt the old pad which I stole from my other press and cut down to fit "Jumbo" Any suggestions? A new pad btw costs about 10 times more than what I paid for the press---so I'd like to recycle this one if possible.
The silver paint on the exterior has peeled off in many areas leaving bare aluminium, so I'm thinking of repainting while I'm at it. RustOleum 'Hammered Aluminium" looks like a good match, but can it withstand the heat? Does anyone have any experience with this?
Thanks!
I also need to re-felt the old pad which I stole from my other press and cut down to fit "Jumbo" Any suggestions? A new pad btw costs about 10 times more than what I paid for the press---so I'd like to recycle this one if possible.
The silver paint on the exterior has peeled off in many areas leaving bare aluminium, so I'm thinking of repainting while I'm at it. RustOleum 'Hammered Aluminium" looks like a good match, but can it withstand the heat? Does anyone have any experience with this?
Thanks!