PDA

View Full Version : info on beseler 8x10 enlarger conversion kit



richard green
12-Oct-2000, 13:32
Hi, I am looking for any information on the Beseler 8X10 conversion kit for thei r 4X5 Enlargers. Has anyone used it?, does it work well?, which lens to use with it, etc.Or should I be looking at another syster for 8X10. Any help would be m uch appreciated. Richard Green

john g
12-Oct-2000, 15:07
Try Calumet photographic 1-800-calumet I have read about it in one of their cataloges. Sometimes the can give some info and are usually more helpfull than the other mail order places. Also check out www.beseler-photo.com John

Sean Billy Bob Boy yates
12-Oct-2000, 20:39
As I recall it was designed to be used with a 240mm

Michael Kadillak
13-Oct-2000, 23:14
I have a Beseler 45VXL with the 8x10 cold light head. It does use the 240mm Beseler lens made for them by Rodenstock which works fine.It is a very sturdy system with plenty of adjustments. Getting it in perfect vertical alignment, as it probably the case with most enlargers, will go a long way towards realizing its optimal results. Unfortunately, I have not use it in about a year and a half as I have been contact printing much of my stuff. Buy used if possible. You will get a much beter deal.

Michael Kadillak