Arca Swiss Field 4x5 141mm

[Doug Dolde]

I have to try really hard to keep the standard leather bellows from intruding into the imaging area and causing vignetting in the corners. Has anyone else with this camera experience this and found a solution other than poking the bellow out from the inside with the back removed? It gets to be a nusiance.

[Jack Flesher]

You might want to try the synthetic bellows as the bellow pleats face outwards instead of inwards. I have one my 141 x 141 Metric and have had zero problems with bellows cut-off. Though it is also possible the 141 x 141 behaves differently than the 141 x 110, if that is how your field is configured...

[Doug Dolde]

I think the 30cm is only leather...you have to go to 60cm to get synthetic in a 6x9 to 4x5 141mm bellows.

[Jack Flesher]

I think if you contact these folks, they might be able to help you: http://www.camerabellows.com/About.html

[archivue]

no problem so far...

[Emmanuel BIGLER]

Same for me, no problem so far with the F-line 110-141 configuration and standard leather bellows.

[Greg Miller]

No problem with mine.

[JPlomley]

No problems to report here.