View Full Version : Glasses for Versalab parallel Laser
Hi
The glasses in the kit for the Versalab have broken and I need a replacement.
Do I need to replace them with the genuine ones provided by Versalab or I can find another solution?
Thanks
Mario
Inviato dal mio RMX3241 utilizzando Tapatalk
Tin Can
12-Sep-2024, 05:36
I assume you mean the very thin slides
Look for microscope slides
Hi
The glasses in the kit for the Versalab have broken and I need a replacement.
Do I need to replace them with the genuine ones provided by Versalab or I can find another solution?
Thanks
Mario
Inviato dal mio RMX3241 utilizzando Tapatalk
Yes that one.
Inviato dal mio RMX3241 utilizzando Tapatalk
Mark Sampson
12-Sep-2024, 09:51
I've used Gepe 35mm glass slide mounts. But any piece of glass that fits in your enlarger should work. I think that any commercially made glass sheet should be flat enough for the purpose.
But who knows? Perhaps Versalab is still in business and can supply those parts.
nolindan
12-Sep-2024, 10:13
I use microscope slides.
You can judge the flatness of a piece of glass by looking at an oblique reflection.
Peter De Smidt
12-Sep-2024, 12:43
I often use a non-coated filter screwed onto the lens, using a piece of opaque tape on the lens side.
Hans Berkhout
15-Sep-2024, 10:58
Peter's approach is excellent. It circumvents the hassle of having to use the small rubber bands with which one holds the (microscope slide) glass in place. These rubber bands will disintegrate/brake with time, and they are hard to find/replace.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.