chandlerrichardsceo
31-Dec-2023, 09:57
Hello all,
It's been a long time since I broke out my DTS Screen 1030AI, but I still wonder about upgrading to a better scanner. I got mine for a hundred bucks some years ago from a liquidator cleaning out a publishing house; so, for the money, it was definitely a good deal. With so few options on the market, I have kept my eyes open for options that aren't a fortune and close enough for decent shipping. Recently, I found a couple options a few hours away from me. They're both Howtek Scanmasters, one a 4500 and one a 7500, both with mounting stations and software. One is capable of 12 bits per color at 5000 dpi, and the other can do 16 bits per color at 4000 dpi. My 1030AI can manage 8 bits per color at 5200 dpi. For those knowledgeable, is there a large enough difference in image quality to justify the cost of jumping from 8 bits to 12 bits? Further, would achieving 16 bits be worth decreasing to 4000 dpi? I mostly shoot 8x10 transparencies these days, at least for LF, but I also have a large back-catalogue of neg and slide 35mm, 120, 4x5, and 8x10 that I would like scan. As Cibachrome bit the dust a decade ago, I figure drum scanning is the best option I have for creating prints of my LF slides. I'd also like to hear from people who have made contact internegatives for printing slides as to whether they can do the original slides justice. As for scanning, I have read that for LF scans, anything above 4000 dpi is a waste and that bits per color is more important.
Concerning the second topic of this thread, I have always done my scans without the help of a mounting station. However, one of the reasons I haven't scanned in so long is my frustration with the pain and constant do-overs when trying to mount film onto drums without a mounting station. Thus, I am looking for information on where I could purchase or commission a mounting station for my current scanner. I will look through the 1030ai groups.io page to see if they have any ideas. While I have become mechanically adept over the years thanks to my other anachronistic hobby of classic cars, I am not much of a fabricator. Besides, I lack the tools for making a mounting station. I recall reading somewhere a few years ago of a company in Australia that would make mounting stations on order.
In personal news, I am happy to say my 4x5 enlarger will collect dust no longer. I have finally finished moving, and I now have space to make set up a more permanent darkroom. I'm excited to try my hand at contact printing. As I really only shoot slides, both 8x10 and 120 for medium format stereo, I have never done much printing, despite having this enlarger for years. I snagged it from a studio that was closing down for free; so, another good deal. I've also been keen to pick up my old experiment of 4x5 and 8x10 stereo. I made one set of 8x10's that showed inconclusive results, though it wasn't a good choice of subject for the matter and before I had a proper camera for the job. I have to get another aerial stereoscope before taking more pairs. And I hope to finally pursue the 8x10 astrophotography project I've wanted to do for years. I bet slides of that size would look amazing. Have to find the right scope and mount first though. If anything comes of these ventures, I'll be sure to post about it.
Happy New Year
It's been a long time since I broke out my DTS Screen 1030AI, but I still wonder about upgrading to a better scanner. I got mine for a hundred bucks some years ago from a liquidator cleaning out a publishing house; so, for the money, it was definitely a good deal. With so few options on the market, I have kept my eyes open for options that aren't a fortune and close enough for decent shipping. Recently, I found a couple options a few hours away from me. They're both Howtek Scanmasters, one a 4500 and one a 7500, both with mounting stations and software. One is capable of 12 bits per color at 5000 dpi, and the other can do 16 bits per color at 4000 dpi. My 1030AI can manage 8 bits per color at 5200 dpi. For those knowledgeable, is there a large enough difference in image quality to justify the cost of jumping from 8 bits to 12 bits? Further, would achieving 16 bits be worth decreasing to 4000 dpi? I mostly shoot 8x10 transparencies these days, at least for LF, but I also have a large back-catalogue of neg and slide 35mm, 120, 4x5, and 8x10 that I would like scan. As Cibachrome bit the dust a decade ago, I figure drum scanning is the best option I have for creating prints of my LF slides. I'd also like to hear from people who have made contact internegatives for printing slides as to whether they can do the original slides justice. As for scanning, I have read that for LF scans, anything above 4000 dpi is a waste and that bits per color is more important.
Concerning the second topic of this thread, I have always done my scans without the help of a mounting station. However, one of the reasons I haven't scanned in so long is my frustration with the pain and constant do-overs when trying to mount film onto drums without a mounting station. Thus, I am looking for information on where I could purchase or commission a mounting station for my current scanner. I will look through the 1030ai groups.io page to see if they have any ideas. While I have become mechanically adept over the years thanks to my other anachronistic hobby of classic cars, I am not much of a fabricator. Besides, I lack the tools for making a mounting station. I recall reading somewhere a few years ago of a company in Australia that would make mounting stations on order.
In personal news, I am happy to say my 4x5 enlarger will collect dust no longer. I have finally finished moving, and I now have space to make set up a more permanent darkroom. I'm excited to try my hand at contact printing. As I really only shoot slides, both 8x10 and 120 for medium format stereo, I have never done much printing, despite having this enlarger for years. I snagged it from a studio that was closing down for free; so, another good deal. I've also been keen to pick up my old experiment of 4x5 and 8x10 stereo. I made one set of 8x10's that showed inconclusive results, though it wasn't a good choice of subject for the matter and before I had a proper camera for the job. I have to get another aerial stereoscope before taking more pairs. And I hope to finally pursue the 8x10 astrophotography project I've wanted to do for years. I bet slides of that size would look amazing. Have to find the right scope and mount first though. If anything comes of these ventures, I'll be sure to post about it.
Happy New Year