Linhof Kardan Color 8x10 Lensboard Options

[Michael Kadillak]

I have a Linhof Kardan Color 8x10 camera that I need to see if I can find a more viable lens board to work with. Currently I was able to find an adapter board that allowed me to use lenhof Technica boards from the 5 1/8" bottom notch lensboard adapter that the camera came with. What I am looking for are the standard 5 1/8" Linhof board with the bottom notch for heavier and wider lenses. Any assistance in where I could find such boards would be appreciated. The image below is my setup. Apologize for the mis aligned image, but you catch my drift.

235577

[Tin Can]

I have a recessed lens board of that type

It uses a larger flat on both sides as you indicate

It has a larger than Technika hole

I mount Horseman large size lens board MOUNTED directly with tiny bolts on the flat Linhof 9" lens board

Never needed to use the recessed 8X10 lens boards

Notice the Packard Shutter DIY Sync with flash trigger inside

I add the entire mess is mounted to the lensboard

https://live.staticflickr.com/65535/52686790565_660460dbff_c.jpg (https://flic.kr/p/2ogKzfM)Lensboard Adapter (https://flic.kr/p/2ogKzfM) by TIN CAN COLLEGE (https://www.flickr.com/photos/tincancollege/), on Flickr

[Keith Pitman]

Have you tried http://www.glennview.com/index.htm ?

[Tin Can]

https://live.staticflickr.com/65535/52692416267_a16a983a44_c.jpg (https://www.flickr.com/gp/tincancollege/Mv13C13u9H)Linhof Boards (https://www.flickr.com/gp/tincancollege/Mv13C13u9H) by TIN CAN COLLEGE (https://www.flickr.com/photos/tincancollege/), on Flickr