View Full Version : Arca-Swiss lensboard Adaptor
Hi all
I need to buy an adaptor for Arca Swiss 142x141 for linhof technika (99x96).
I have found two products
1.LUNAND
https://www.ebay.it/itm/Luland-ARCA-SWISS-LP-141-141mm-per-Linhof-99X96mm-adattatore-Board-Lente-Nuovo-/185309686317?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
2. E-TONE
https://www.etonephoto.com/products/arca-swiss-141x141mm-to-linhof-technika-lens-board-adapter-4x5-8x10-large-format?_pos=7&_sid=e6fdb21aa&_ss=r
Did anyone have any experience with those two products/brand?
Any preference or suggestion?
Thanks
Mario
Mario
Kiwi7475
22-Apr-2022, 14:41
I have the Luland version but for 171x171mm (the Oschwald era of Arca’s). It just works. Wouldn’t hesitate recommending it. I have no reason to believe the 141mm version will be any different.
eric black
22-Apr-2022, 17:52
The Luland 141mm version works well too in my experience
neil poulsen
22-Apr-2022, 19:15
I have a Luland 171mm adapter to 6x9 that works well. Fit is tight; no wiggle room.
That's Great.
Thanks for your suggestions.
I'll go for luland then.
Mario
Max Schaeffer
10-Sep-2022, 05:57
Hello,
Does anyone have used an adaptor 110x110 to Linhof Technika adaptor?
Which brand have you find?
Thanks,
Max.
Alan9940
10-Sep-2022, 06:53
Hello,
Does anyone have used an adaptor 110x110 to Linhof Technika adaptor?
Which brand have you find?
Thanks,
Max.
I have the Luland 110x110 Arca to Technika adaptor and am very satisfied with it. As others have already said, the fit is spot on and there's not lacking in build quality.
neil poulsen
10-Sep-2022, 08:15
I don't have direct experience with the actual adapter that you need. But, I have a Luland 171mm adapter that accepts 110mm Arca lensboards, and it works well.
Max Schaeffer
10-Sep-2022, 08:52
I have the Luland 110x110 Arca to Technika adaptor and am very satisfied with it. As others have already said, the fit is spot on and there's not lacking in build quality.
Thanks Alan :)
Max.
Max Schaeffer
11-Sep-2022, 00:59
I don't have direct experience with the actual adapter that you need. But, I have a Luland 171mm adapter that accepts 110mm Arca lensboards, and it works well.
Thanks Neil.
Max.
I have a 141 to Linhof Teknica adaptor and it works very well.
Inviato dal mio RMX3241 utilizzando Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.