View Full Version : Copal S Shutter info
I am looking at a fuji 180MM in a Copal S shutter - I am familiar with the copal numbered shutters, but cannot find the hole size for Copal S anywhere, is it actually a 3S?
Dan Fromm
18-Apr-2020, 08:29
Which 180 is it? For shutters used with those lenses, see http://www.subclub.org/fujinon/byfl.htm and scroll down to 180 mm.
pendennis
18-Apr-2020, 08:54
I am looking at a fuji 180MM in a Copal S shutter - I am familiar with the copal numbered shutters, but cannot find the hole size for Copal S anywhere, is it actually a 3S?
You might try measuring the diameter of the shutter threads, with a set of calipers, and check on this site:
https://www.largeformatphotography.info/lensboard_hole_sizes.html
I had the Sub Club bookmarked, but it appears the link is dead.
Steve Sherman
18-Apr-2020, 11:46
I am looking at a fuji 180MM in a Copal S shutter - I am familiar with the copal numbered shutters, but cannot find the hole size for Copal S anywhere, is it actually a 3S?
This information is from the SK Grimes website202773
Copal 3 lens board hole is 65mm and the Copal 3 S is 64.1 mm
Cheers, SS
B.S.Kumar
18-Apr-2020, 15:56
The '3' in '3S' may have simply rubbed off. It is most likely a Fujinar 180mm f/4.5 barrel lens.
Kumar
Could it be one of these?202784
B.S.Kumar
18-Apr-2020, 17:54
I forgot about the Wista press shutters. If it is one of those, it is a #1 size. Wista press shutters were made in #0 and #1 sizes. The very last Shanel shutters were also marked Wista.
Kumar
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.