View Full Version : Efke 50 and 100 Roll and Sheet film in HC110
Does anyone have any experiences with using efke 50 and 100 iso films in 4x5 or 120 roll film with HC110??
The only data I can find is mainly RO9 and Rodinal related. Rodinal and HC110 are the only dev's I use and from yesterday - no more rodinal at my supplier.
So what do you expose these at and process it at when using HC110??
Steve Feldman
21-Nov-2005, 14:04
Here's a good starting point.
http://www.digitaltruth.com/devchart.html
Bill_1856
22-Nov-2005, 08:58
J&C carry Rodinal as well as the EFKE products.
Donald Qualls
22-Nov-2005, 10:59
As with other Agfa Photo products, J&C won't have Rodinal for much longer if they still have it now. They do, however, have Calbe R-09, which is made to the formula of pre-WWII Rodinal and works almost identically (they recommend higher dilution, 1:40 in place of 1:25, but that may be to avoid too-short process times). You can also make quite an acceptable (based on the images I've seen) Rodinal substitute from acetaminophen (aka paracetamol) tablets, lye drain opener, and a little sodium sulfite.
BTW, it's generally accepted that you can interchange process times between HC-110 and Ilfotec HC at the same dilution, so on the off chance you find times for one and have the other, you're still covered...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.