PDA

View Full Version : Shanghai B & W film - Annual LF and ULF sheet film Campaign 2019



pierre506
27-Apr-2019, 08:47
190707

Updated few cutting sizes --May 17, 2019

peter schrager
27-Apr-2019, 09:19
no whole plate size??

Roger Thoms
27-Apr-2019, 10:30
Whole Plate would be a nice addition, also what methods of payment are you accepting?

Roger

peter schrager
27-Apr-2019, 11:09
no 8x10 size either??

Louis Pacilla
27-Apr-2019, 11:30
no 8x10 size either??

Maybe 4x5 & 8x10 are their typical stock sheet film size & always available so not on "special order"?

pierre506
27-Apr-2019, 15:57
no whole plate size??

What's the exact cut sizes of "whole plate"?
I may ask the factory to add it.

pierre506
27-Apr-2019, 15:59
4x5 & 8x10 are regularly provided.

peter schrager
27-Apr-2019, 18:08
What's the exact cut sizes of "whole plate"?
I may ask the factory to add it.
Someone better than me should answer this

Roger Thoms
27-Apr-2019, 22:34
I’m out of town so I can’t measure any of my whole plate negatives right now. Could in about a week. Hopefully someone will answer before then. Isn’t the actual size a 1/16” under he nominal size so 6 7/16” x 8 7/16”

Roger

pierre506
28-Apr-2019, 06:41
I’m out of town so I can’t measure any of my whole plate negatives right now. Could in about a week. Hopefully someone will answer before then. Isn’t the actual size a 1/16” under he nominal size so 6 7/16” x 8 7/16”

Roger

Thanks,Roger,


The sizes in mm are better.

Simon Benton
28-Apr-2019, 16:46
Pierre

Your inbox is full

peter schrager
28-Apr-2019, 23:23
Whole plate is 6.5x8.5 inches
Someone else can back this up please

pierre506
29-Apr-2019, 04:26
Will try to clean my inbox, Simon

pierre506
29-Apr-2019, 23:13
Updated few cutting sizes and added Bergheil 6x9 sheet film size--April 30, 2019

Nodda Duma
30-Apr-2019, 09:57
Pierre, the 164 x 215 mm sizing you selected for whole plate will work but is sort of at the high end of the dimensions especially taking tolerances into account.

Please refer to ISO 1012:1998, "Photography - Films in sheets and rolls for general use - Dimensions". This standard traces back to the era when whole plate and the other "odd" sizes were still being commonly produced, and the holders would have conformed to film dimensions listed. Particularly useful for your need are Tables 6, 7, and 8.

The whole plate (16,5 x 21,6 cm) is a recognized sheet size in the standard, with "Aim" or nominal dimensions of 163,5 x 213,8 and a tolerance of +/- 0,8 mm for each dimension. I would recommend using this as your target dimensions to ensure the sheets will fit in the holders out in the world.

Let me know if you need any other dimensions out of the standard if you can't get access to your own copy. Happy to help. :) There's a few on your list that deviate from nominal in the standard but should be ok if the dimensions you list aren't exceeded. Shanghai B&W should have a copy of the standard on file.

Cheers,
Jason

pierre506
30-Apr-2019, 11:10
Thank you, Jason,
I believe the cutting sizes,164x214mm, for full plate is acceptable.
I will update it soon.
Yes, I am not sure other cutting sizes, too.
And will try to improve those sizes, too.
Many thanks, again.

peter schrager
15-May-2019, 20:56
what is the final date for the buy?? and where do we send the money??

pierre506
17-May-2019, 01:19
191378
Updated few cutting sizes --May 17, 2019

pierre506
17-May-2019, 01:20
what is the final date for the buy?? and where do we send the money??



check the sheet carefully

pierre506
28-Jun-2019, 05:39
Two days left.

Tin Can
28-Jun-2019, 06:33
I just ordered 400 sheets of 3X4 aka 1/4 plate!


Two days left.

Tin Can
27-Aug-2019, 15:12
And received today.

20 hours from Shanghai to my hands.

Jim Fitzgerald
27-Aug-2019, 16:08
My 14x17 is coming today.