PDA

View Full Version : Mounting frame Cambo Sc 8x10



AnselAvedon
7-Feb-2018, 20:53
Any ideas of how to either create one or find one.

AnselAvedon
7-Feb-2018, 20:54
I've been looking on eBay and all I see is a reducing back that I'm reluctant to purchase and cut up

mdarnton
8-Feb-2018, 06:01
What's a mounting frame????
https://static.cambo.com/Files/accessories_view.pdf

Tin Can
8-Feb-2018, 06:21
C206 is an example.

Hard to find 8x10.

Horseman used Cambo also.

I have found C206 cheaply and cut on up.

Dan Fromm
8-Feb-2018, 07:34
OP, do you mean a ground glass back (see http://www.glennview.com/vcam.htm) or a reducing back? If neither, what do you mean?

AnselAvedon
8-Feb-2018, 09:01
A mounting frame for the rear side of the bellows. Sorry for not leaving all the details.

samurai610
8-Feb-2018, 09:10
If it's the back you need, the part you insert the film holder into, I have one without the ground glass. It's labeled cambo, but not sure which model. Pm me if thats what you are looking for...

Tin Can
8-Feb-2018, 09:21
This? It's 8X10 Cambo with a removable Horseman mount. Both sides are the same.

Not for sale.

https://farm5.staticflickr.com/4617/28372886779_c7bbb1fae6_c.jpg (https://flic.kr/p/KedsK6)Horseman 8X10 Frame- Cambo (https://flic.kr/p/KedsK6) by moe.randy (https://www.flickr.com/photos/tincancollege/), on Flickr

Dan Fromm
8-Feb-2018, 09:47
A mounting frame for the rear side of the bellows. Sorry for not leaving all the details.

I'm sorry to be so dense. Do you mean a bellows frame (ends up being part of the bellows) or a function carrier (bellows attaches to one side, camera back, which includes the GG, attaches to the other)?

If the function carrier or the entire 8x10 rear standard (includes the function carrier), have you asked Cambo where you can get one? These days Cambo is pretty responsive.

Your best bet may be to be patient and wait for a complete 8x10 Cambo to come up for sale. They sometimes sell for reasonable prices.

Pere Casals
8-Feb-2018, 10:44
Any ideas of how to either create one or find one.

Time ago I 3D printed 4x5 CAMBO mounting frames, and a SINAR board to CAMBO frame adapter, in black ABS, it worked perfect.

If you want the Solidworks or STL files for 4x5 just send me PM, design can be modified easily for 8x10, or even I can modify it for you... then with the STL you may print it around...

174509

Regards

Pere Casals
8-Feb-2018, 14:06
In this dropbox, 3D printable file for CAMBO for 4x5 bellows' frame, for the case somebody else wants it.

https://www.dropbox.com/sh/py9qtgq7im1gpdv/AAAWd6Fumqgh-T0r2ZwxmfQ8a?dl=0

Printing in black ABS recommended, 80% printing density or so.