View Full Version : Sironar 240mm Rear Element Anyone?
G Benaim
25-Jul-2005, 01:35
Hello,
i recenly purchased a sironar 240mm with separation in the rear element, and was wondering if anyone has one of these elements lying around that I can buy from them. Thanks.
Steve Hamley
25-Jul-2005, 02:47
You might consider having John Van Stelton at Focal point recement it if there's nothing else wrong with it. Probably cost about $180, and you don't have to worry about a mis match.
http://www.focalpointlens.com/fp_menu1.html
Steve
Bob Salomon
25-Jul-2005, 03:41
The front and rear cells are matched at the factory before the lens is shipped. You can't mix and match cells and expect proper results.
Donald Hutton
25-Jul-2005, 09:27
"You can't mix and match cells and expect proper results."
Quality control must be really bad if this is the case - I find it hard to believe that the rear elements would not be interchangeable on the same model lens - what's involved in the "matching" process?
Bob Salomon
25-Jul-2005, 09:51
" I find it hard to believe that the rear elements would not be interchangeable on the same model lens"
The lens is not a 240mm. It is ±240mm and the front and rear cells are matched depending on what the actual focal length is.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.