alan_b
17-Aug-2017, 13:48
Hi, long time lurker here...
Can anyone shed some light on this rear coupling frame? It's missing the heavy plate at the bottom which holds the ground-glass back/bellows/lensboard in place. You can see the front coupling frame which is what I'm familiar with as a typical P-series part. The metal cover plate on the mystery frame is too light to securely hold a gg-back securely in place. The hex rod clamp is also different than I've seen before.
Another question, I believe this camera has an 8x10 rear bearer. What is the knob on the left side with the folding lever?
Thanks!
Alan
168578
Can anyone shed some light on this rear coupling frame? It's missing the heavy plate at the bottom which holds the ground-glass back/bellows/lensboard in place. You can see the front coupling frame which is what I'm familiar with as a typical P-series part. The metal cover plate on the mystery frame is too light to securely hold a gg-back securely in place. The hex rod clamp is also different than I've seen before.
Another question, I believe this camera has an 8x10 rear bearer. What is the knob on the left side with the folding lever?
Thanks!
Alan
168578