View Full Version : Tiltall 4062
Kleiny41
25-Feb-2017, 07:13
Does anyone know how to increase tension on the legs? I picked up one on EBay and it has very floppy legs. I can't seem to tighten the Phillips head screws at the top.
Sent from my iPhone using Tapatalk
Remove the Phillips head screws, and replace with grade 8 hex head bolts... I think they were something like 8-32 or 10-32, and 1/4 or 3/8 long... A good hardware store has these...
If you have trouble removing them, bring tripod to a good mechanic or machine shop, 'cuz they will know what to do (and might break while removing, and are probably stuck)...
You will then be able to torque the new screws with tools to the right tension...
Good luck!!!
Steve K
Kleiny41
25-Feb-2017, 08:23
Thank you!!
Sent from my iPhone using Tapatalk
Keith Pitman
25-Feb-2017, 09:49
This site is all about Tiltalls:
http://tiltallsupport.blogspot.com
You might find some other suggestions.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.