View Full Version : Tiny chip in rear element: consequences ?
I just obtained a "new" lens, a Geronar 300mm f9 which has a tiny chip (missing a half moon shaped 1 mm wide chip) at the edge of the rear element. This was fully disclosed by the seller, no surprise here.
I was just wondering how much effect, if all, it has: The Geronar is stated to have a coverage of 340mm, and I will use it on my 4*5. Can I assume that this chip might influence the projected image only at the edge of the cover circle, so no problem for 4*5 ?
Or is this is a too simple reasoning ?
best,
Cor
Peter De Smidt
2-Mar-2016, 03:06
You may consider darkening the chip. That out to minimize any flare (or other issues) caused by it.
Lachlan 717
2-Mar-2016, 03:12
None.
Steven Tribe
2-Mar-2016, 05:01
Absolutely no effect - other than when you sell it.
Absolutely no effect - other than when you sell it.
Or bought it..:)..
Thanks for reassuring me, guys.
A bit related question, mostly out of curiosity;
I found somewhere that the Geronar is of relative simple design: 3 elements in 3 groups (3/3), but I cannot find any drawing scheme such as shown here (http://www.prograf.ru/rodenstock/largeformat_en.html#table1) for the modern Rodenstock lenses.
It looks like the rear element is one piece of glass, so the front element consists of 2 piece with air in between I assume ?
thanks,
Cor
B.S.Kumar
2-Mar-2016, 07:30
Absolutely no effect - other than when you sell it.
Tell me about it :)
Glad you're relieved, Cor!
Kumar
No problem, Kumar, wasn't too worried in the first place, always a pleasure dealing with you, your description of items, communication and packaging are first rate !
Thanks,
best,
Cor
..ps anybody knows a lead to an internet page with a drawing of the 3/3 Geronar ?
Tell me about it :)
Glad you're relieved, Cor!
Kumar
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.