View Full Version : Mounting this Graflex Sport Viewfiner Mask 9101
Sirius Glass
14-Dec-2014, 15:46
I purchased this Graflex Sport Viewfinder Mask 9101 which does not fit into the tubular viewfinder. It is a piece of plastic approximately 3.5"x4". What do I need to properly mount this mask?
Tin Can
14-Dec-2014, 15:51
Not to sound facetious, but you need a 'Sports Viewfinder' to fit a 'mask' into one.
It's the metal frame that pulls up from the front standard.
Sirius Glass
14-Dec-2014, 16:04
Not to sound facetious, but you need a 'Sports Viewfinder' to fit a 'mask' into one.
It's the metal frame that pulls up from the front standard.
I have that already. I do not know how to mount the piece of plastic on the wires and springs.
Tin Can
14-Dec-2014, 16:09
There are many variations of sports viewfinders.
Look up an old manual. http://www.butkus.org/
Sirius Glass
14-Dec-2014, 16:16
I think that it will snap in place, but can I trust it to stay?
Sirius Glass
14-Dec-2014, 16:53
I was just told that it snaps into place. No duct tape is required. No extra parts are needed.
Tin Can
14-Dec-2014, 17:33
I was just told that it snaps into place. No duct tape is required. No extra parts are needed.
That was easy.
Sirius Glass
14-Dec-2014, 17:59
That was easy.
Life is not like that.
Tin Can
14-Dec-2014, 22:10
Life is not like that.
Always use a tested bungee.
Sirius Glass
15-Dec-2014, 18:33
Always use a tested bungee.
I specialize in cordless bungee jumping.
Tin Can
15-Dec-2014, 18:34
I take pictures. Weegee style...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.