Mounting bolts for Durst 138

[iml]

My Durst 138 with CLS 301 colour head has been in storage for a couple of years. Finally I'm rebuilding a darkroom. I have all the parts for the Durst apart from the four bolts which are used to mount the head. I remember these were Allen head bolts, probably metric sizes, and I think the two front bolts are longer than the two at the rear. Can anyone with a 138 tell me what sized bolts I need? I can measure the diameter but it's difficult to estimate what the right length is. Thanks for any help, Google doesn't seem to know the answer.

[Luis-F-S]

Definately metric, the two front are 2 7/8" overall, the two rear are 1 1/2" overall. Sorry, I don't have the size. Mine are not Allen, but regular slotted heads. I'm out all next week, but if you still don't have it, when I come back I can take one to the Depot and get the size. Hope this helps. L

[Liquid Artist]

I'm a long ways away from my 138 too, but can tell you that it also has slotted head screws.

[iml]

Thanks, that's helpful

[iml]

Managed to get the bolts. Diameter is metric M6. Many thanks guys for the help.