geopadi
26-Mar-2014, 15:43
Does anyone know of someone in the UK who can repair a Graflex grafmatic back model 1268 for grafloc.
It was working fine until recently the shouldered set screw holding the lock sheared off, fortunately I rescued the little ball bearing and spring for the 3 stop positions but I need a new set screw and the threaded hole needs retapping to accept it.
Also unfortunately in my examination and disassembly it is not working properly ie. the whole drawer will not slide back in properly, the dark slide operation is still OK.
So rather than make things worse I would like to defer to someone with experience and have the job done properly.
Hope someone out there in UK can help!
George
It was working fine until recently the shouldered set screw holding the lock sheared off, fortunately I rescued the little ball bearing and spring for the 3 stop positions but I need a new set screw and the threaded hole needs retapping to accept it.
Also unfortunately in my examination and disassembly it is not working properly ie. the whole drawer will not slide back in properly, the dark slide operation is still OK.
So rather than make things worse I would like to defer to someone with experience and have the job done properly.
Hope someone out there in UK can help!
George