PDA

View Full Version : 4in square lens boards, what do they go to?????



boatboy343
8-Feb-2014, 08:08
110078cleaning house.....any body know what they think these go to? have a small flange at the edge .will be selling them but need to know what they go to
110077110076

David Lindquist
8-Feb-2014, 09:45
They look like they are for the Calumet 4 X 5, the CC-400 series.
David

BetterSense
8-Feb-2014, 11:46
I may be interested.

jcoldslabs
8-Feb-2014, 12:38
They look like they are for the Calumet 4 X 5, the CC-400 series.

Yep.

BetterSense
8-Feb-2014, 13:29
I cleaned out my pm inbox fwiw

Alan Gales
8-Feb-2014, 16:16
They look like they are for the Calumet 4 X 5, the CC-400 series.
David

I also agree.

I had a recessed board like that at one time that I got from some where.

gleaf
8-Feb-2014, 20:27
The boards seem to be cast with the low ridge on the inside. +1 for Calumet C4xx series. Interested when the come available. I will be patient and not jump the tentative line. ( -;

Gregg Obst
9-Feb-2014, 15:16
Yes, I agree. Calumet CC40X series. I have one of those as my backup camera.

Doremus Scudder
11-Feb-2014, 05:09
Yes, I agree. Calumet CC40X series. ...

And the Graphic View I and II. I have one of those recessed boards for mine. They also fit Beseler enlargers.

Best,

Doremus

AtlantaTerry
11-Feb-2014, 06:56
Thank you folks for the information. I also have one flat and one recessed lens board that I picked up somewhere along the line. Now I know what they can be used for.

Maybe I thought they might work with a Speed Graphic but since I have a Crown Graphic and 3 Cambos they are of no use to me. If someone could use them, send me a PM with an offer.

Terry

joselsgil
11-Feb-2014, 22:50
And the Graphic View I and II. I have one of those recessed boards for mine. They also fit Beseler enlargers.

Best,

Doremus

You have the Calumet 400 series, as pointed out. They are not interchangeable with the Graphic View cameras. I tried, they won't work :(

Wally
16-Feb-2014, 17:00
I second that. I found out the hard way.

Kirk Fry
16-Feb-2014, 18:42
The recessed board is evil. Even if you can get your fingers in to run the lens controls you won't have any movements due to bellows compression. You would be better off to buy a CC402 which is designed for wide angle lenses with flat boards. KEH has a bunch of them for ~200 ish or about what a bag bellows costs for almost every other make of view camera.