PDA

View Full Version : Questions about Horseman 810



Terry Moore
27-Jan-2014, 18:37
I just acquired 3/5 of a Horseman 810 body--rail/tripod block, front and rear standards and I have a few questions about it. On my Horseman LE 4X5 all of the movements are geared throughout their complete range. On this camera the rear fall is only geared for the first 10mm with the remaining 20mm being friction. On a related note when the rear standard is zeroed out for rise/fall the sliding piece sticks about 1 1/8 inches above the L frame. Are either or both normal for this camera? Thanks!