View Full Version : Ultra large format camera build filmed in time lapse
thorley
20-Jan-2014, 20:38
This build has a real standard that will accommodate a 14' plate and will sport a Zeiss Apo Jena Tessar f9 60cm that requires one meter extension for portrait work.
Hoping to get over a meter of extension with something that is convenient, portable and practical to load into a small car.
Tips on the track-extension-folding system are invited.
three minute time lapse video that shows assembly and focus test.
https://www.youtube.com/watch?v=p9XQrT_zBF0
Amedeus
20-Jan-2014, 20:55
Nick ... good to see you here !
I enjoyed watching the video ;)
Tin Can
20-Jan-2014, 21:01
Looks good, you sure work fast!
May I suggest a wheeled table/tripod? ;)
Will the front movements be motorized and remote controlled? Sorry if that was ansvered in the video. I saw it without sound.
Best regards
Steven Tribe
21-Jan-2014, 04:11
Tips on the track-extension-folding system are invited
That is a very pertinent question and it may now be a little late in the day. Perhaps a couple of different length solid baseboards with wing screw attachments to allow for possible use of wide angle. My 30x40cm camera has extension up to 120cm.ph
thorley
21-Jan-2014, 04:58
Thank you Soeren I will seriously consider wheels, on a tripod not a table.
I have made a sturdy tripod for star trails on a windy salt lake, but it was horribly hard to use and didn't pack well at all.
Kimberly Anderson
21-Jan-2014, 07:00
Thank you for making me smile this morning. This project is great. I will be sharing this with my students soon. :)
very good - very nicely presented too -
Harold_4074
22-Jan-2014, 18:40
A simple way to make extended controls might be to use a flexible shaft with a knob at the back; guide blocks with through holes will control "whip" if the torque is high.
If takedown is desired, a 1/4" drive socket engaging a hex on the movement shaft (lock two nuts together with a dab of epoxy and your all-thread becomes a long, fully-threaded bolt) makes a nice coupling. Right-angle drives for the shifts can be had from your local equivalent to McMaster-Carr (USA).
Petzval Paul
22-Jan-2014, 19:53
Excellent video and the camera is really coming together nicely!
Steve M Hostetter
24-Jan-2014, 11:35
Hello Nick, wonderful video :)
I have produced an image, but it is still getting refined. Here is a video of the progress and first image.
https://www.youtube.com/watch?v=2Xjl2XJWC0g
Lachlan 717
6-Jul-2014, 00:34
Nice refinement, Nick.
analoguey
6-Jul-2014, 01:33
Not able to see the video yet but is it a 14 foot-plate? Or inch?
Drew Bedo
6-Jul-2014, 08:18
Thorley: Up-date?
polyglot
7-Jul-2014, 02:52
lovely!
munz6869
7-Jul-2014, 03:23
That's marvellous!! I love the Melbourne weather sound fx in the first video. V. accurate.
Marc!
fecaleagle
9-Jul-2014, 18:12
Not able to see the video yet but is it a 14 foot-plate? Or inch?
It is a 14 (by 11?) inch plate. I nearly wet myself when I read 14' as well, but it is admirably well-done and documented. Definitely worth a view, and thanks for sharing it with us, Thorley!
A lot of work for what now appears to be a 8x10 camera.
Looks very nice, I do hope you intend on shooting some film larger than 8x10 in it! :) Wish I had the kind of patience required to build something like that... I intended on building an LF camera a couple of years ago.. It ended up being a wooden box with a fixed focus 90mm lens and a 4x5 graflock back... Then again I intended to build another about 6 months ago and instead I bought a Chamonix... haha.. Committed? Me? Hardly...
thorley
25-Oct-2014, 23:04
http://youtu.be/j0MEjV5dOik
http://youtu.be/j0MEjV5dOik
Wonderfull project. Love the magnet mounting!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.