8x10 back on a 5x7 camera

[durr3]

Ji

I have a NOBA Model 5 5x7 portrait studio camera with a 5x7 back and a 4x5 back.

I would like to know if it is possible to get or make an 8x10 back for this camera.

I can send photos, if you are not familiar with the Noba.

thank you,

J Durr Wise

[John Kasaian]

Probably not without an extension of some kind to clip onto the rear standard to clear any gear tracks or rail

[Lachlan 717]

Probably not without an extension of some kind to clip onto the rear standard to clear any gear tracks or rail

Also to avoid mechanical vignetting from the [existing] rear frame.

[blindpig]

My answer would be yes it's possible. I worked with an 8X10 view camera we used mostly for copying flat art and needed to take 11X14 negatives for a job.
We constructed a light weight box which attached to the back of the camera and was made to accept an 11X14 back.As this was used as a copy camera it of course didn't require back swings or tilts. This rig was used successfully for many years.The camera was a Deardorf and the "box" attached using the normal tabs used for the interchangeable backs. May have to fit a longer lens to prevent any vignetting(again wasn't a problem with our copy set up).

[Andrew Plume]

have a look at this:

http://www.ebay.co.uk/itm/Wista-Rittreck-Rittreckview-camera-with-5x7-8x10-backs-/111250575834?pt=Film_Cameras&hash=item19e70d11da

which is what you're referring to - I have no connection with this item/sale

regards

andrew