PDA

View Full Version : Sodium Sulfide Question



C_Remington
23-Dec-2013, 13:12
So I bought some of this from Photo Formulary awhile ago. It doesn't indicate whether this is anydrous, monohydrate, etc.

If not labeled, what is the customary default assumption??

thanx

Jim C.
23-Dec-2013, 13:22
I've always taken anhydrous as being dry, like a powder, crystals or pellets.

C_Remington
23-Dec-2013, 13:47
Well, all dry chemicals can be in the form of power, crystals or pellets. The anydrous, etc. nomenclature refers to the molecular structure. Specifically, how many water molecules are present.

It will make a difference when you go to weigh them out.

Richard Wasserman
23-Dec-2013, 13:50
Sulfide or Sulfite? How about asking Photographer's Formulary directly? I'm sure they'd be happy to answer any questions you might have about their products. http://stores.photoformulary.com/-strse-template/locator/Page.bok

C_Remington
23-Dec-2013, 14:19
Sulfide. I actually thought this would be easier. I guess I"ll try there next.

Cor
24-Dec-2013, 04:03
If it's used for a toner it does not matter too much, you usually tone by inspection, see also:

Sodium sulfide
From Wikipedia, the free encyclopedia

Sodium sulfide is the chemical compound with the formula Na2S, or more commonly its hydrate Na2S9H2O. Both are colorless water-soluble salts that give strongly alkaline solutions. When exposed to moist air, Na2S and its hydrates emit hydrogen sulfide, which smells like rotten eggs. Some commercial samples are specified as Na2SxH2O, where a weight percentage of Na2S is specified. Commonly available grades have around 60% Na2S by weight, which means that x is around 3. Such technical grades of sodium sulfide have a yellow appearance owing to the presence of polysulfides. These grades of sodium sulfide are marketed as 'sodium sulfide flakes'. Although the solid is yellow, solutions of it are colorless.