View Full Version : Agfa/Staeble/Eskofot Helioprint/Repromaster/Ultragon/Intergon
Ian Greenhalgh
28-Nov-2013, 21:15
Hi folks
I have been collecting a nice set of these lenses, so far I have 8/135, 9/150, 9/210 and 9/240. The 135 and 150 only have the labelling 'Repromaster' but the 210 and 240 are labelled 'Staeble Ultragon'.
I have also seen some labelled 'Staeble Intergon' but they look the same as my Ultragons.
There are also much larger versions such as a 9.5/213 which I am sure must be different designs.
I'm interested in gathering together as much info about these lenses as possible, so far all I can find are anecdotal comments by users such as Jim Galli who said 'they have all the attributes of the G-Clarons'.
Lachlan 717
28-Nov-2013, 22:51
There are also much larger versions such as a 9.5/213 which I am sure must be different designs.
Can help much, but I had one of these that I mounted on my 7x17 to see whether it covered. Didn't hit the corners (approx. 10mm short), so I sold it on.
Ian Greenhalgh
29-Nov-2013, 00:36
Interesting, that's a hell of a big image circle for a 213mm lens. Was that coverage at a small stop?
Lachlan 717
29-Nov-2013, 14:45
Interesting, that's a hell of a big image circle for a 213mm lens. Was that coverage at a small stop?
I didn't get that far with it, Ian. It didn't have many stops (I think it only went to f32), so I figured that I was shooting too close to the edge regardless.
Sorry that I can't help more...
Ian Greenhalgh
29-Nov-2013, 15:55
Thanks Lachlan, that is quite useful info.
The 9/210 and 9/240 I have close to f64.
I have the 213/9.5 which I used several times on an 8x10 Deardorff, I was never able to get it to clip a corner. I also have a 14" lens that came with the same batch, which I assumed was from the same maker but it's unmarked. It has an f22 Waterhouse stop held in place by 2 screws. I've never shot with the stop removed so I don't know the aperture wide-open, but I've been meaning to try. I've had some difficulty focusing at f22. From what I can see, it appears related to the Heliar.
Ian Greenhalgh
29-Nov-2013, 16:37
Good to know that lens covers 8x10 with room for movements, cheers.
Hi, Just got a heiloprint 213, I'm wondering if anyone knows the size of the retaining ring or where I'd get one I'm guessing its 77 or 76mm.
I would like to know what size the thread mount for 210 and 240 is. Anyone can help? Thanks
europanorama
16-Aug-2016, 13:38
I have the Eskofot Ultragon 9/150 and G-Claron 9/150 by Schneider-Kreuznach.
Data sheet says G-Claron has M32.5 x 0.5 thread. Eskofot has the same.
I tested both on the right adapter and wrong with 0.75pitch. we made the wrong adapter.
I then rechecked with pitch-size-measuring tool called caliper right?
its seems the dents at 0.5 are not precise and on one caliper engraving is bad. who can deliver HQ-caliper pitch measuring tool?
here is my thread:
http://www.largeformatphotography.info/forum/showthread.php?130900-Eskophot-Ultragon-9-150-lens-thread&highlight=eskofot+ultragon
EdWorkman
17-Aug-2016, 17:56
Several years ago many of these were discussed regarding ULF use
I spose there are appropriate search terms that will pay off
The discussions , as typical, include hearsay, but more importantly, actual experiences
europanorama
20-Aug-2016, 16:43
I have the Eskofot Ultragon 9/150 and G-Claron 9/150 by Schneider-Kreuznach.
Data sheet says G-Claron has M32.5 x 0.5 thread. Eskofot has the same.
I tested both on the right adapter and wrong with 0.75pitch. we made the wrong adapter.
I then rechecked with pitch-size-measuring tool. dont know the right term.
here is my thread:
http://www.largeformatphotography.info/forum/showthread.php?130900-Eskophot-Ultragon-9-150-lens-thread&highlight=eskofot+ultragon
it could easily be guessed since M32.5 x 0.5 is Copal 0 mount thread- see skgrimes-table.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.