richardman
16-Nov-2013, 23:04
I sent the Saber to adjust for the B setting on the shutter. All these back and forth shipping knocked the vertical alignment off.
No problem, I said. I adjusted the vertical alignment on the Epson R-D1 a few times, and Lo and Behold, I found even a thread on the LFF that says:
When you remove the cover of the RF, there is a little screw on the right that adjusts the RF.
Cheers,
Luc
So opened 2 screws and there it is, a little screw on the right! Turn turn turn, hmm... how comes it does not seem to affect the vertical at all "Ah Cr*p, the screw fell out!" Oops. Along with it, a little metal arm came off and there is a little roller thingie :-(
Now I need either a detailed instructions/diagram on the Polaroid 100 RF or I need to send the unit back for repair. Sigh...
104792
No problem, I said. I adjusted the vertical alignment on the Epson R-D1 a few times, and Lo and Behold, I found even a thread on the LFF that says:
When you remove the cover of the RF, there is a little screw on the right that adjusts the RF.
Cheers,
Luc
So opened 2 screws and there it is, a little screw on the right! Turn turn turn, hmm... how comes it does not seem to affect the vertical at all "Ah Cr*p, the screw fell out!" Oops. Along with it, a little metal arm came off and there is a little roller thingie :-(
Now I need either a detailed instructions/diagram on the Polaroid 100 RF or I need to send the unit back for repair. Sigh...
104792