View Full Version : What is the Problem?
Front elements of the Symar appear to have paint flakes migrating into the optics. Rear elements are fine. Repairable? Replaceable? just buy a new one?
97436
Doremus Scudder
23-Jun-2013, 11:11
A bad case of Schneideritis... A good technician can disassemble and clean your lens. Search here for technicians in your area.
Best,
Doremus
Kevin Crisp
23-Jun-2013, 11:37
Unscrew the front retaining ring using an SK Grimes wrench with the flat tips, carefully turn it over let the front element fall out onto a cloth. Use an air can to blow off the paint, reassemble.
Bill_1856
23-Jun-2013, 12:03
Ignore it -- it ain't that serious.
It may well be a case of just unscrewing the fromnt cell and a clean, I've repainted a few cells on the edges where the paint has flaked off. It happens with a few makes not just Schneider.
Ian
Thanks to all. Anyone recommend an 'optical black' for touch up if needed.
Kevin Crisp
23-Jun-2013, 18:00
I just use a Sharpie (takes several coats) on the ones I recement. Works fine.
Sharpie's in abundance in several tip widths, check. SK Grimes says the flat tip spanner will be on the way shortly, check. Advice I can understand... group you are good and appreciated.
patrickjames
24-Jun-2013, 21:06
I use a Sakura Pigma Brush Pen to paint cells. It is much better than a Sharpie. You should be able to find one in any art store.
Mr Grimes supplied the spanner in short order. I opened the front cell today. Clean and neat in short order. Will find the Pigma brushes pens shortly. Progress is wonderful.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.