- film size
- 6x9 Rollfilm holders for 2x3 Horseman-what's best?
- Shipping Film
- 5 x 7 transparency film availability?
- instant process
- Which film for landscapes/portraits?
- Film cutting (re: Quang-Tuan Luong response)
- VC Papers in LF (4x5) printing (Question)
- Traveling with exposed sheet film
- Masking Techniques
- E-6 Processed Film stability
- HP COMBI PLAN T 4X5 FILM PROCESSOR
- ASA or ISO what is the difference
- 4x5 film processing techniques
- dark room equipment
- Zone system testing method
- Roll Film Back for 4x5
- Cheap Arista Film
- APX25
- Graphic 6x9 roll film back
- Unremovable dust
- ansco convira paper
- dip&dunk tank
- Horseman RFH 612 for Linhof S. Technika V
- Unsharp Masking instructions and a handmade registration system
- Linhof Tech II 6x9cm , what kind of film holders fit?
- historic convira paper, ansco
- Polaroid Dye Transfer - 8x10??
- Washing of 4x5 negatives
- Water Temp Control&Filter, Print/Film Washers
- Pyro Developer
- Defining one's personal ASA for a film
- Questions: 4x5 Fuji Velvia Film
- Correcting underdevelopped film
- darkroom
- Reciprocity failure for Kodak E100SW
- Prints out of focus
- dust on 5x4 B/W neg / printing
- t55 polaroid film-defects
- Drying 8 x 10 film
- darkroom and white walls
- Color Neg or Transparancy Film?
- using a Daylight Developing Tank
- Processing Ilford Delta 100 in XTOL
- Unsharp Masking Techniques
- 4x5 Daylight Processing Film Tank
- JOBO Expert Tanks for 4x5 film processing
- Problem developing 4x5 sheets in Jobo processor
- JOBO tanks on Unicolor motor base?
- FUJI b&w and color neg QUICKLOADS, Interested?
- Diafine developer
- Making Graflex roll film holder fit.
- Protecting film from heat
- Washing of 8x10 film.
- Contact printing 4x5
- Nikkor 4x5 dev. tank
- Best E6 chemicals for 5x4" in Jobo
- Tank Processing
- Ilfochromes at home
- getting 4x5 Ektachrome processing
- Developing 8x10 sheet film in JOBO CPE processor?
- Protecting film at airports
- Fed Ex-ing exposed film back to US from overseas?
- Trying to do 6x12 without losing your shirt
- Polaroid Type 79 filtration
- making an enlarged negative
- Beginner to Contact Printing needs help
- polariod type 55 p/n film
- BTZS film tubes
- Tube Developer Experiment Results
- Another 6x12 question
- B & W enlarging paper
- ortho film
- dust or hair on my films
- Difficulty of developing my on E-6
- t-max 100
- Water Spots on Negative
- Best rollfilmholder 6x12?
- unsharp masking
- Bright area on prints
- Slide film latitude: Is there any difference?
- European source for Fuji Velvia sheet film 5x7" or 13x18cm
- polaroid 55
- Hardening fixers: pros & cons?
- "Newton's Rings" from Contact Printing?
- UV Lightsource
- Roll film back: horseman vs toyo
- NOCON enlarging timer
- on processing POLA 55 in the studio after shooting
- Xtol + Ilford Delta 4x5
- JOBO Processing Question
- PMK Pyro and Tri-X
- JOBO 3010
- Paper/developer Combination
- FW: Three fiber-based papers to be discontinued by Kodak in 1999.
- equipment needed for film processing
- Polaroid Film Comparison
- "Archival" wash aids
- green tint on negative
- Paper to use for platinum/palladium printing
- Zone System
- Sending film for processing
- ISO and Temp.
- Can you do N-1 development with C-41 chemistry?
- Scratches on negatives
- Kodak D-23 developer
- Suggestions for developing Agfa 100 APX 4x5 sheet film
- Compensating enlarging timers ? Who knows?
- Contact printing: condenser v. bare bulb
- processing Polaroid Type 55 negatives in real chemistry?
- pyro with JOBO 3005 drum on roller base
- disposal of PMK Pyro?
- APX discontinued?
- PMK in Jobo 2800 drum
- Slide Films for 2X (or greater) Marco Photography?
- film stock for 5X7
- Platinum printing
- Lith Printing
- What's your opinion about B&W Papers?
- JOBO 3010
- negative to negative to negative
- 3 1/4 X 4 1/4 Availability
- PRINT PAPER WILL NOT LAY FLAT BEFORE PRINTING
- Developping lith film
- Temporary storage of exposed sheet film for later identification
- 4x5 Daylight Tank
- Purple tone across negative
- Azo paper
- Fiber base print drying racks
- To stop or not to stop
- questions concerning infrared film
- Polaroid Emulsion Lift
- Bleaching Pyro negs- need advice
- DORAN 4"x 5" developing tank
- developing 4x5, help
- Harveys 777 still available?
- Film Developer Combinations
- Drab or flat photos
- missed exposure
- Dilution of T-max RS
- Getting started (again) in B&W processing
- Processing for Archival Stability
- developer for Azo???
- Developing 4x5 Film by Inversion in a Jobo Tank 2500
- Development times using Jobo Expert Drum
- Photo Chemistry Storage
- B&W film for LF landscapes
- Solarizing Polaroid pos/neg & outdated stock
- 4x5 developing tank...
- Developing film with Nova Print Processor
- Processing B&W in a Unicolor drum
- XP2 vs. TMAX 400
- Technidol/4X5 Tech Pan in Jobo
- Sheet film dev. in Tmax a no no??
- densitometer
- Developing Sheet Film at N - 20%
- 4X5 neg film
- Film Testing
- Suggestion for notching film
- Linhof Super Rollex 6*7
- Do you POP?
- Airport X-Rays and precious film!
- reducing density on negative
- Instruction Manual for ESECO Densitometer
- Quality of four part E-6 kits?
- ra4 chemicals for room temperature processing
- How To Load Horseman 6X9 Back???
- Unexposed unrefrigerated film still OK?
- DENSITOMTERS
- Sheet film storage in film holders
- processing 4x5
- film type for submital art
- printing-out-paper
- Polaroid film and reciprocity factor
- Enlarging lenses: APO or not?
- Tracking LF Negatives Developed By Labs
- Trouble with Type 55 P/N
- Kodak Polymax Fine Art Paper
- Too much agitation when fixing film
- Rollfilm on 4x5 or not To Rollfilm on 4x5 That Is The Question?
- Doran Developing tank by Doran enterprises inc.
- difference using dichroic vs variable contrast light head?
- accuracy of Polaroid tests for determining exposure
- Kodak High Speed Infrared Film - How soft emulsion?
- Black and white film
- Contact Printing
- Thoughts on BPF200
- Which 4x5 B&W films capable of N+/-2 or greater?
- Polaroid Type 55 reciprocity corrections?
- Darkroom Chemicals and Septic Systems
- Arista Sheet Film....Any Users?
- Agfa 4x5 films
- Amidol
- rollfilm on SINAR F2 4x5"
- Dark Room Design
- Kodak T400CN query
- 8x10 enlarger
- 8x10 enlarger
- Contact Printing
- How to remove crud from negative once it's dried
- Photo blotting paper
- Horseman 6x9 back question??
- Graflock roll film back
- need info re: cyanotype contact printing
- Chemical formula for Hypo
- Agfa RSX100 Transparency Film
- Photo chemicals
- Berrger Films
- Old Unicolor system for developing sheet film
- Arist cold light
- Another question about contrast control
- Archival B & W Labs?
- Darkroom light
- hose that can be connected to tub faucet
- RC vs fiber paper?
- Zone System for E6 Film
- film choice for landscapes
- T-Max 100 at EI 64, what are the times?
- Contact Printing
- Azo&ferrotyping
- Large format color neg film
- Polaroid 55 - Can we increase sensitivity ratings with longer developing?
- HC110- I made a mistake but everything was fine?
- Is there a good one-shot fine -grain developer for FP4?
- Best pen/pencil for signing prints.
- Azo paper for contact printing
- Ethol LPD developer
- Will a roll back fit a 6x9 Linhof Super Technica
- Did Ilford make changes to FP4 Plus recently?
- Fuji Astia 100 - Landscapes? Does it really gain 1 stop exposure latitude?
- cold light vs. regular white
- agitation and developer
- Altering the contrast of color papers?
- T-max Headed For Trash Can
- Controlling color print contrast by masking
- SINAR Zoom II Roll film holder and/or Linhof Rapid Rollex
- Toyo Roll Film Holder
- B&W to Color; which film?
- B&W film contrast range
- Sources of Cibachrome printing
- Who does dye-transfer printing?
- Who does platinum printing?
- Ortho film revisited
- Sources of tubing for 8x10 BTZS-type developing tubes
- 120 vs. 220 rollfilm holders (6x9)
- 6x6 roll film backs for 2x3 Horseman?
- Spotting Negatives
- Availability of Tri-X sheet film
- new Fujichrome 64T Type II
- Calumet Roll Holder Model C2