- TMAX Film - What's so bad about it?
- developing roll film
- anyone shoot 4X10 E-6?
- masking for a non-contact print
- the end of T color negs ?
- fixer question
- Pyro question as regards exposure
- image with a shutterless lens
- TF-4 Archival Fixer
- Sooo what 5x7 B&W film are You shooting??
- Polaroid 79
- Maco cube 400c in Rodinal?
- ERA 100 and jobo drum question
- PMK -- Crystals in part B
- Anyone used color duplicating film in outdoor shooting?
- 5x7 film in a Jobo 3005 Expert Drum
- Shanghai film
- developing times for long exposures
- 2x3 sheet film
- RIT Closes Wet Lab, Sends Film to Praus
- Katzman's wet plates
- Experience with Fuji LI-IMc film
- Long-life paper developer/replenisher combo
- Printing round and oblong.
- ID11 stand processing
- What is the closest to Kodak Elite?
- Efke 820IR
- BW safelight question
- What's in the box? Another Efke victim...
- mailing 8x10 transparencies
- Contact prints w Film in Sleeves: How to do it right?
- Problems W/Polaroid Back/Type 55
- Maco Infrared Sample Arrived Today.
- Now what am I going to do?
- Lodima Fine Art paper update
- Contact Printer - How's this work?!
- Is it just me or is that new kodak portra
- Totally black Tri-x 320 4x5" :(
- Efke "tropical"?
- Foma 200 and Arista 200 EDU Ultra
- Hanson Cycle-Select Film Agitator
- 8x10 negative developing
- Dry Mount Press removed tone
- Hardening Fixer
- Contact Printing: Maco, Forte Ilford..?
- Your best substitute for Agfa Fiber paper?
- Fujichrome T64 "performance"
- Suggestions for E6 processing
- Jobo vs. Contact Printing Opinions sought
- How do you do Low and High Key Picture?
- At sunset what color is the landscape?
- New velvia 50 asa..any further news??
- Developing my 1st negative
- My first E-6 processing using jobo cpa-2
- Efke 25
- Developing 8x10 negs using a JOBO print drum
- Update from J&C
- Mounting and framing a 16 x 20 color photo
- Transparencies or Negative? Which type do you prefer?
- 14x17 film Options
- Under exposed or under developed?
- 4x5 roll film
- Efke IR820 in a Harrison Film Tent??
- The antichrist of digital
- Need help picking frame
- Retro Project and Carelton Watkins
- Looking to do some Semi-stand 4x5 with Rodinal... what Film?
- Developing and agitation
- Polaroid Type 79
- Nitrogen Burst Agitation
- Arches Platine
- I'm a film testing moron- wadda ya think?
- Cloudy fixer
- day for/as night technique?
- Ultrafine ULF film?
- JOBO 3010 Drum- Needs Repair? or not
- Bad batches of Ilford FP4?
- Using a Jobo tank for 4x5 film ?
- First 4x5 B&W films processed...
- Can Anti-Fog work for film as well as paper?
- Acros in Rodinal - disappointment
- Adox 100 (chs?)
- A wee milestone...
- Tungsten film and architecture question...
- Jobo in Canada
- Collector film craze and capitalism
- need big paper!
- First time with a 3005
- Adox CHS 100 and Rodinal
- The Lure of Simplicity--Ansco 130
- 120 Ilford Pan F/ Need your help
- Kodak Aerial 2422 Film
- Need advice on my 1st 4x5 shots
- What did I manage to do?
- B&W Contact Printing Enlarger/Head
- Storing Exposed Film
- tube agitation
- Darkroom Fun.
- Pyrocat HD or in Glycol?
- Beginner Questions
- First film
- Densitometer Numbers - What they Mean
- Agitation using magnetic stirrers
- TMAX question
- 5x4 Slide Mounts
- Greg Mironchuk method of TMX developing
- New Velvia 50 (RVP50) film
- How?
- volume of developer for Unicolor drum method
- Can I reuse fixer?
- Printing question regarding exposure times
- Current methods of printing from color negs
- I know nothing... which film and chemicals would you reccomend?
- 4x5 color processing near South Carolina
- Ilford HP-5 Mis-Boxed
- Fixer: hardening vs non-hardening
- printing on glass
- Battle of Britain (papers!)
- Sorry, I didn't pay attention - 5x7, 13x18 12x16.5?
- PMK and Densitometers
- question on Pyrocat HD agitation
- 11X14 transparency film order
- paper and film in Canada
- Unicolor Discovery!
- 8x 10 film washer
- Deep Tank 5x7 Fomapan 200 processing issues.
- Help mounting glossy prints.
- Saw this in Portland, Oregon Craigslist. Lots of paper for sale!
- Choice of fixer on print color
- Pyro solution sediment
- making BW neg from color tran with type55?
- Old Kodak And Ansco Film
- Is there good information somewhere about negative comparison?
- Fuji Bromide Rembrandt Paper
- Selenium treatment for VC RC Paper
- Infrared LF films
- What Densitometer for PMK?
- Powder to Granular
- Mercury separated in thermometer
- Polaroid 54 hints
- slosher tray technique.
- Problem slide
- Quickload questions on storage and carrying.
- Tri-X, Tri-X Pan, or TMY?
- Looking for Tmax 400 in 5x7 ?
- waiting for the new Velvia
- Jobo 2509n reel scratching film
- Pre-Cut Archival Mats for 5x4
- Testing For Reciprocity
- HC-110 vs ???
- Getting ready to do my first E-6
- 6x9 cm vs. 2.25x3.25"
- Film for highlight masking
- Agfapan APX 100 and HC110
- Care of Film Holers
- 13x18 cm sheet color film negative in Europe
- Forte Poly Warm tone paper
- am i printing too small?
- Acros
- Polaroid confusion: 51, 52, 53, 54, 55, 56, 57, 59, 72, 79
- uprating 100 iso film
- Jonco FilmRunner processor anyone?
- Cutting down film and how to do it correctly??
- using outdated b&w sheet film
- Darkroom Water Stains on B&W Prints
- a customs officer opened my film!
- RV Darkroom
- Fomapan 400 Sheet Film
- Black residue from hard rubber tanks
- C-41 at Room Temperature
- Disposing of RC Prints
- How bad is concentrated stop bath for your skin?
- HABS/HAER Photography guidelines
- Lab that does 8x10 Chromes
- Ilford Delta 3200 Film
- Kodak hardener in Ilford fixer?
- Old Varigam and HC-110 - tips?
- Adox ORT25 film for portraits?
- Efke 25 and filters?
- Contact printing - materials?
- Polaroid 545pro timer problem (545 pro)
- Neopan vs TMax
- Rodenstock APO Enlarging Lenses
- 4x5 developing system
- Kentmere Br & AZO Grades & Neg Contrast
- Expired (1973) Kodak HIE.... will it have any life in it?
- HC-110 developer dilutions?
- Effect of developer dilution
- Photo shot with X-ray film
- E6 8x10 labs in Scandinavia/Northern Europe
- Looks Like Static Marks...
- Who do you use for shipping your E6 orders?
- Fuji Velvia Numbering
- Rant, really!!
- Delta 100... Xtol or ID-11?
- Why Does Presoaking Make a Difference?
- Ilford SFX 200: Process as soon as possible after exposure... Heed this warning?
- Foma Film
- More contact printing experiments - what happened THIS time?
- Narrowing down film choices for 7-day trip.
- First time order from Calypso
- JandC Photo "Mystery" Film
- 5x7 Film Bulk Purchase Thoughts
- Finally, I am halfway there!
- Precautions when mixing and using Pyrocat-HD
- What options for daylight processing?
- Efke 7x17 film on ebay
- Kodak Survey: Film vs. Digital - Your views please
- Foma warmtone classic fiber and Bleaching
- Glossy Contacts
- Identifying film by notches - again
- L.F. Film in Orlando
- Need an overview of what JOBO has to offer
- Poll: Development Method
- How soon after shooting do you develop?
- PCat-HD + Rapid Tetenal Fixer
- Anybody using 510 Pyro?
- Alternative Printing (P.O.P) question
- Is velvia back?
- jobo 3005 and un-fixed portion
- Ilford Selenium toner vs KRST?
- 5x7 Kodak Portra 160 NC
- Full plate film size
- Densitometer for Pyrocat negs
- WTB Jobo Alt 1500 or similar processing device
- Efke 25 in HC-110?
- 5x7 BW 400 film options
- Era vs Shanghai?
- Dirty Film Box from Freestyle, Anyone else?
- Lab for both C-41 & E-6?
- Printing down a phone line...
- Fa-1027
- TMAX exposure index
- Burning - Any Tips?
- Any preference between Fomapan 100 and Fomapan 200?
- ISO for Freestyle APHS Ortho/Litho as camera film?
- Hard water!!!
- Found Unopened Pyrocat and TF-4 Should I Use It?
- Contemporary framing question
- BTZS film testing question
- Developing N-1 or N-2, how much less time?
- Se toning question
- What slide format will survive the digital age
- Is this exposure or developing?
- E6 in europe
- Quality of Polaroid 55 pos/neg film?
- Irving Penn & large negs for platinum printing
- Hostert dip and dunk filters needed
- QuickLoad - home processing tips?
- D-76 1+1, dip-n-dunk with tmy,tmx