Activity Stream

Sorry Kevin that was pretty obtuse. I tend to yada yada over details these days. I should state up front that I processed the Heliar image to roughly...

Fuji Acros is my favorite mostly due to the reciprocity characteristics being much better any other B&W film. Used for 617 format. For 5x7 and...

Very good! I must wait until PayDay

On my Busch Vademecum Satz 2, the spacers are missing: I guess they are difficult to find... Someone?

Can you post a picture? There are many variants around. Somebody here should know. I've seen Peco Profia 5x7s complete so I would guess they did...

On a limited basis, Randy, while I work on refining the results. I’ve started listing in the Experimental section of the store when I coat enough...

Like! x2

Gillespie Dam, Arizona Arca-Swiss 4x5, 150mm, Ilford FP4+ Some of my digital photography friends inquire as to why I’d lug a big large format...

I have a Plaubel Peco 5x7, and it uses these strange 1-sided film holders. Did they ever make a standard 5x7 back for my camera?

There is a 40x60 shed on our property that has an overhang on the back side. Dad always used to stash stuff he didn't know what else to do with back...

I guess this article may be pertinent to 3D printing I am not the I I DESIGNED MY OWN 3D PRINTED LENS HOODS BECAUSE NIKON’S SUCK

You have portrayed place, time, and atmosphere very well indeed!

ah too bad! at least you tried. thanks.

No prob Rivitgun. Thought you would enjoy it. Restored Peco Profia no 2 and Norma No 6 by Nokton48, on Flickr Here is my nearly restored Peco...

When the 2000 and 3000 became available they simply changed the name of the rangefinder model to Master Technika Classic. Before that it was just...

Do you now sell black glass coated Dry plates? Seems to be an interest

Adox CHS II 100 is a very fine film indeed. Nearly as good as FP4+, and at half the cost in the EU. I prefer classic emulsions as well.

I’ve been enjoying experimenting with dry plate ambrotypes: Black glass coated with my ASA 25 emulsion and developed to a positive. For film,...

Not with a 90mm example. But it gives a impression from different focal lengths on 4x5" https://garymulder.nl/fotografie/focal_length_examples/

Cousin ITt

If you have access to the various materials, you might try printing a lens board with each and comparing. My guess is that ABS would be the most...

Wasn't she in the Muppets ? Martin

To the best of my knowledge only tmax100 has this uv blocking property. So for alt process printing, tmy would be fine, but so would be any of the...

Very good to know Steve Thank you

Henny Youngman "Take my wife ... please"

I use FP4. Great looking film, and it plays so well with Rodinal. Great setup for people like me who do not process film that often (once a week...

Consider TMAX400 (TMY) if you intend to do any alt-process printing that requires UV exposure. Because it has no UV-blocking your print exposures...