Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Voigtlander Euryscop questions

  1. #1

    Join Date
    Mar 2010
    Location
    Huntsville, Alabama, USA
    Posts
    150

    Voigtlander Euryscop questions

    I just got (today) a Voigtlander Euryscop 5 and have a few questions for someone familiar with them. First, should the lens elements unscrew from each end like a typical lens of the era? Tried a bit and couldn't budge them, so wanted to be sure I was on the right path. Lenses need some cleaning but appear in excellent shape.

    I believe the lens to be a Rapid Rectilinear, (or maybe Extra Rapid based on the 1890 lens catalog) I am gleaning that the 5 is the fourth series and is 17 1/2" covering 11x14. Any details about the date range of manufacture or anything else interesting or useful would be appreciated. My intent is to use on 11x14 for portraits both film and wet plate.

    Thank you in advance

    Click image for larger version. 

Name:	Voigtlander5.jpg 
Views:	92 
Size:	53.3 KB 
ID:	74794

  2. #2

    Join Date
    Nov 2006
    Posts
    218

    Re: Voigtlander Euryscop questions

    you're right, this is an earlier Euryscope Series IV #5. You can date it using the serial number (various tables of Voigtlander serial # vs. dates can be found in this forum or elsewhere online).

    Both sets of lenses should unscrew from the barrel, the hood will also unscrew. working slow and patiently you should be able to remove them. By the way, someone has disassembled this in the past, as the barrel is upside down (numbers/letters should be upside down when the lens is upright as in your photo). It does make a small difference --the slot for stops is not exactly in the center of the barrel!

    cheers

    Tim

  3. #3

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    6,246

    Re: Voigtlander Euryscop questions

    Just to supplement Tim!
    The front lens glass diameter should be 3 1/8" and it is listed for 14x17" coverage.

  4. #4

    Re: Voigtlander Euryscop questions

    Dates to 1886 +/- 1 year.

    Dan

    Antique & Classic Camera Blog
    www.antiquecameras.net/blog.html

  5. #5

    Join Date
    Mar 2010
    Location
    Huntsville, Alabama, USA
    Posts
    150

    Re: Voigtlander Euryscop questions

    Thank you all. I will persevere to get it apart and reassemble it inverted as you recommend Tim. Steven, at least I was on the right table in the Voigtlander listing, I was looking at the portrait column. If I look at the other column, I might be tempted to build a 14x17 like Jim F. Very nice to have the date range a little narrowed down, I'll look for the serial number table mentioned.

  6. #6

    Join Date
    Jan 2009
    Location
    Denmark
    Posts
    6,246

    Re: Voigtlander Euryscop questions

    Just to anticipate your next questions!

    No, there isn't a shutter available which matches the front and rear cells!

    This is average brass condition - like most, in other words.

    The glass almost always is in better condition.

    Waterhouse stops can be made quite easily.

  7. #7
    funkadelic
    Join Date
    Sep 2008
    Location
    Yadkinville, NC, USA
    Posts
    1,300

    Re: Voigtlander Euryscop questions

    I'm seeing a regional trend here. Euryscops are migrating to SE USA. Someone in GA recently posted about one they just received. Now AL. I've got a couple (but none this big) here in TN.
    Welcome to the club!

  8. #8

    Join Date
    Dec 2000
    Location
    Tonopah, Nevada, USA
    Posts
    6,334

    Re: Voigtlander Euryscop questions

    Beautiful lenses! You're lucky to have it. Black meets copper is the threaded joint. I use stuff I buy from the Napa Auto parts store called Rubber Buffer (used in tire repairs) to free up stuck threads. It doesn't attack any of the components and leaves no residue.

  9. #9

    Join Date
    Jan 2012
    Location
    Ellenwood, GA
    Posts
    242

    Re: Voigtlander Euryscop questions

    Me!
    I bought a great copy of the Voigtlander Portrait Euryscop III F4.5 No.4 10.5" from GSX4 in the for sale area here.
    I have it mounted on a Sinar board, though, my Sinar f2 is only 4x5.
    Same board I cut a hole in for the Wollensak Soft Focus 12 inch f3.8 Portrait Lens I bought from eddie, also from here.
    I need to cut another board, that way both could have their own board.
    Need a drill press setup to perform this correctly, hard to hold a drill and 3" hole saw to cut a metal board.
    Though, I did the first one from a simple nail together jig, guess I can do another...
    I have shot with the Wollensak, but have as yet with Voigtlander.

    Quote Originally Posted by cdholden View Post
    I'm seeing a regional trend here. Euryscops are migrating to SE USA. Someone in GA recently posted about one they just received. Now AL. I've got a couple (but none this big) here in TN.
    Welcome to the club!
    Last edited by buggz; 6-Jun-2012 at 14:43.

  10. #10
    LF/ULF Carbon Printer Jim Fitzgerald's Avatar
    Join Date
    Aug 2007
    Location
    Vancouver Washington
    Posts
    3,929

    Re: Voigtlander Euryscop questions

    Bill, congrat's. I love my IV Euroscop. Great lens although my is the Hybrid version and is a 20" lens that does not show in the catalog?????? Follow the great advice here and you can't go wrong!

Similar Threads

  1. Need help with Voigtlander Euryscop
    By vitality in forum Lenses & Lens Accessories
    Replies: 20
    Last Post: 22-Jun-2011, 11:05

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •