Results 1 to 5 of 5

Thread: Beseler 8x10 drum

  1. #1

    Join Date
    Apr 2009
    Posts
    347

    Beseler 8x10 drum

    I got a Beseler 8x10 processing drum with a bunch of dark room equipment. It came with the motorized roller unit.

    Any experience with this kind of drum?

    Both end come off the drum and one lid has a half moon shaped protrusion the length of the drum about 1/2 in from the drum side.

    I'd be interested in any experience with this kind of drum, if it works well, and any tips on how to properly load it.

    /gth

  2. #2

  3. #3

    Join Date
    Apr 2009
    Posts
    347

    Re: Beseler 8x10 drum

    Yes, Vinny, I've done that and found a lot of information including a photo of 4 4x5 film sheets loaded in this drum. Results are varied, and it seems this drum is not the best for film.

    Curiously I did not find any info on its use for PRINT processing, which apparently is what it was designed for.

    I am still interested in hearing about experience with this drum from LFF members.

    /gth

  4. #4

    Join Date
    Apr 2009
    Posts
    347

    Re: Beseler 8x10 drum

    Hey Vinny, I checked out your website.... nice work!!

    So I gather you process in Jobo drums. From the demand I've seen here on the sales forum, I gather that's the ticket for drums.

    Just looking at that Beseler drum the whole process seems rather sketchy, if not risky to put a fine negative in there. I suppose since it is purely mechanical process, it would be possible to get a high degree of consistency. It would seem hard to keep the temperature constant during the process though..... with the drum on a simple in-the-air roller. I guess you preheat the loaded drum to development temperature before you start processing the negative?

  5. #5

    Join Date
    Sep 2011
    Location
    San Diego
    Posts
    23

    Re: Beseler 8x10 drum

    I routinely use it for 8x10 b&w processing with decent results. Make sure you have good ambient temperature control at 68-70F, the drum is level and you pour in solutions quickly. For D-76 1:1, reduce development time by about 12% over what is recommended. The only uneven development issues I encountered were when the development time was below 5 mins. Hope this helps.

Similar Threads

  1. Beseler 8x10 drum
    By dfoo in forum Darkroom: Film, Processing & Printing
    Replies: 5
    Last Post: 8-Mar-2010, 15:54
  2. Beseler 11x14 Drum
    By solace in forum Darkroom: Equipment
    Replies: 15
    Last Post: 26-Nov-2008, 07:19
  3. Problems with Beseler drum
    By Leonard Evens in forum Darkroom: Film, Processing & Printing
    Replies: 10
    Last Post: 4-May-2006, 07:55
  4. Loading 8X10 in Beseler Drum
    By Steve_3850 in forum Darkroom: Film, Processing & Printing
    Replies: 2
    Last Post: 17-Jan-2004, 05:33

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •