I have another column where both plastic tipa are in contact with the column. Is it worth the effort transferring the counter balance springs, and other parts to the other one?
I have another column where both plastic tipa are in contact with the column. Is it worth the effort transferring the counter balance springs, and other parts to the other one?
Negeri Sembilan, Malaysia, Asia.
Need a pair of cbs!
Negeri Sembilan, Malaysia, Asia.
The other one went in.
Negeri Sembilan, Malaysia, Asia.
Will use only one till I find a replacement.
Negeri Sembilan, Malaysia, Asia.
Since the enlarger is still in production you can probably get the springs from omega: http://www.omegabrandess.com
If that does not work, someone on APUG posted that they got springs (not quite the same) from this place: http://www.pullmanbalances.com/
Also check KHB and Harry's ("I have all the Omega Counter Balance Springs in stock. This includes springs for B-22, B-66, D-II, D-2, D-3, D-4, D-5, D-6". -- Harry Taylor)
Emailed each and every one of them
Negeri Sembilan, Malaysia, Asia.
Just set up EVERYTHING.
I should've set it up in the darkroom. Now I have to push the thing 10 metres to my darkroom.
Negeri Sembilan, Malaysia, Asia.
Curse you 2.25mm allen keys! Need one to level the colour head.
My local hardware store only stocks them in 2mm and 2.5mmNeed to shave the 2.5mm down I guess
Negeri Sembilan, Malaysia, Asia.
Seems like you're taking the hard way. Even McMaster–Carr doesn't sell between 2 & 2.5. If metric doesn't fit, and it is indeed an Allen type, try English (inch) sizes.
Omega = made in USA! You need SAE wrenches! I have a special box of tools just for the Omega as it is one of the few things I own that uses SAE wrenches and hardware.
Posting Permissions
Reply With Quote
Bookmarks