Time for Acros in pyrocat HD and Jobo

[chris6869]

I develop the HP5+ in pyrocat HD using my jobo. I have found that 9min15s is great.
I would like now to try the fuji acro 100 with the same process.
What time would you recommend if you know both films ?

Christian

[IanG]

I'd go for the same time, while I use a Jobo tank it's inversion - pre rotary, but I process HP5 and Acros 100 in the same tank with no problems.

Ian

[chris6869]

Thank you Ian.


Christian

[David Schaller]

I process Acros for a minute less than HP5. It's a higher contrast film. I also use Pyrocat in a Jobo with hand inversion.
YRMV,
Dave

[chris6869]

Thank you Dave.

Christian

[Roger Thoms]

I'd go for the same time, while I use a Jobo tank it's inversion - pre rotary, but I process HP5 and Acros 100 in the same tank with no problems.

Ian

Ian, what is your time, temp, dilution, and agitation schedule for inversion processing Acros in your Jono tank? I want to try this and it would be great to have a good starting point. Also do you pre-soak the film?

Roger

[Larry Gebhardt]

My times for Acros in a Jobo are 9 minutes in Pyrocat HD 2+2+100 at 24C. I do a couple minute prerinse as well.